Auto Racing Driver Suits

Sparco Eagle RS8.2 Driver Race Suit The Sparco Eagle RS-8.2 race suit uses a combination of HOCOTEX and Eagle fabrics to produce an ultra lightweight and breathable race suit. With the aim of obtaining a closer and more modern fit, preformed armholes have been used, and, in line with the requirements linked to driver mobility during a race, the elasticized panels have been optimized (armholes, sides and elasticized back). The main structure of the Sparco Eagle RS8.2 race suit, like in the previous version, is the tried and tested characteristic HOCOTEX, (single-layer weave of 0.6mm ultra-thin fabric), combined with other accessory fabrics like Sparco's Eagle elasticized fabric (well-known and used in various Sparco race suit models), and panels in contrast in flat, ultra-light cloth for anti-abrasion reinforcements on the legs and arms. Stitched quilting made with thin yarn, concealed pockets, a pre-formed neck, and belt with the characteristic Sparco logo round out the functional features of the Sparco Eagle RS8.2. SPARCO EAGLE RS 8.2 RACE SUIT DETAILS This suit weighs between 290 and 320 grams per square meter Pre-curved arms and legs prevent material bunching and pulling when in the driving position Strategic stretch panels throughout Available in sizes EU64 and EU66 only FIA 8856-2000 homologation

Sparco Prime Spec 1 Race Suit SAVE OVER $1,100 OFF THE ORIGINAL RETAIL PRICE! The Sparco Prime Spec 1 race suit is a USA-exclusive race suit that was designed to improve upon Sparco’s original top-of-the-line Prime SP-16 race suit. The first thing you'll notice is the new race suit's updated design. The Prime Spec 1 race suit adds two new multi-color options. In addition to the new design, the Sparco Prime Spec 1 race suit adds extra features like fully-floating sleeves, a waist belt, and internal pockets. THE LIGHTEST FIA-APPROVED SUIT ON THE MARKET The Sparco Prime Spec 1 race suit, made in collaboration with the McLaren Formula One team, is the lightest FIA-approved racing suit in the world. The Prime Spec 1 race suit boasts unparalleled technological features created in Sparco’s R&D laboratories. This project involved optimizing every detail in terms of materials and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa® wrist and ankle cuffs, the neck and shoulder pads were further reduced, and thinner thread was used with flatter stitching throughout. The Sparco Prime Spec 1 race suit features three-layer construction using proprietary Sparco technology. The third outer layer is a double-faced mesh made from original DuPont Nomex Comfort® woven using the Kompact® system. This material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability. The Sparco Prime Spec 1 race suit features pre-curved arms and legs as well as strategic stretch panels, giving the suit unbelievable comfort. The Sparco Prime Spec 1 race suit is available in two colorways. SPARCO PRIME SPEC 1 RACE SUIT TECHNOLOGY FIA 8856-2000 approved Lightest FIA approved suit in the world Exclusive DuPont Nomex® fibers provide superior fire protection and comfort Pre-curved arms and legs Strategic stretch panels Seamless arm and leg stitching

Sparco Competition Driver Race Suit (Boot Cuff) The Sparco Competition Race Suit is the perfect balance of value and high-end features such as lightweight fabric and comfortable air flow. The Sparco Competition is made from the latest generation of synthetic fire-resistant fabrics that offer a soft, light-weight outer layer and breathable interior inserts. The Sparco Competition features a unique elastic arm cuff not featured on any other race suit. This unique cuff system allows the cuff to easily tuck into the gauntlet of of your racing glove. The Sparco Competition also features pre-curved arms and legs, a large rear mesh stretch panel, and a breathable inner-thigh stretch panel for incredible comfort. Technological Features of the Sparco Competition Race Suit FIA 8856-2018 homologated SFI 3.2A/5 approved Unique arm cuff system Pre-curved arms and legs Multiple strategically-placed mesh stretch panels

Sparco Competition Women's Race Suit FINALLY! A Women's fire suit that is available in a colorway other than pink or light blue! The Sparco Competition "Lady" race suit is an all-new lightweight three-layer race suit specifically tailored for women. It offers superior fire protection, breathability and comfort. The Competition Lady race suit is made from the latest generation fabrics which offer a soft lightweight outer fabric and breathable inserts at the sides and underarms. Large stretch panels and full floating sleeves for maximum comfort. It also features a light-weight zipper and collar, pre-curved arms full floating arm sleeves, hidden pockets, tone on tone stitching and the Sparco signature epaulettes. SPARCO COMPETITION WOMEN'S RACE SUIT TECHNOLOGY Tailored specifically for women Lightweight three-layer construction Full-floating sleeves Pre-Curved arms and legs Ultra-soft knit cuffs Light-weight zipper Multiple stretch panels for comfort SFI 3.2A/5 FIA 8856-2018 SKU 001144L SPARCO COMPETITION WOMEN'S RACE SUIT SIZE CHART

Sparco Competition Driver Race Suit The Sparco Competition race suit is the perfect balance of value and high-end features such as weight and comfort. The Competition race suit is made from the latest generation of synthetic fire-proof fabrics which offer a soft light-weight outer and breathable inserts. The Competition race suit features a unique elastic arm cuff not featured on any race suit. This unique cuff system allows the cuff to easily tuck into the glove gauntlet. The Competition race suit also features pre-curved arms and legs, large rear stretch panel and a breathable inner thigh stretch panel for ultimate comfort. SPARCO COMPETITION RACE SUIT TECHNOLOGY FIA 8856-2018 homologation and SFI 3.2A/5 Approved Unique Arm Cuff System Pre-curved Arms and Legs Inner Thigh Stretch Panel SKU 001144 SPARCO COMPETITION RACE SUIT SIZE CHART

OMP Tecnica Hybrid Fire Suit The OMP Tecnica Hybrid race suit is a Professional high spec 2-layer race suit which benefits from traditional Nomex flame retardant material paired with high tech printed inserts and additional embroidered detailing. The external layer is a shiny Nomex material providing a modern look while the inner layer is a soft knit Nomex for high levels of comfort. Floating sleeves with elastic bellow, knitted elastic insert on the back for maximum freedom of movement. Shaped collar with inner soft knitted fabric, adjustable velcro's belt, ultra-flat anti-rubbing seams and soft insert on groin guarantee maximum comfort. Breathable inserts on hips and under the sleeves, pockets with diagonal cut on front, fishbone quilting. OMP TECHNICA HYBRID RACE SUIT FEATURES Two-layer race suit with 400 g/m2 material weight FIA 8856-2018 approved Shiny outer Nomex material for superb looks Soft knit Nomex lining material provides high levels of comfort Breathable elasticated inserts on the lower back, hip and sleeve vastly improve mobility and comfort Ultra flat, anti-rubbing seams eliminate pressure points for an improved fit and feel Fully-floating sleeves for less restrictive arm movements The OMP Tecnica Hybrid race suit offers fully floating sleeves and an elasticated insert on the lower back and breathable inserts on the hips and sleeves which all provide increased comfort and flexibility. The race suit also features a shaped collar with soft knit fabric, adjustable Velcro belt and ultra-flat anti rubbing seams and a soft groin insert also aids comfort between the legs. The race suit is finished in vertical fishbone quilting with hidden side pockets. Available in a range of complimenting colors. SKU: IA0-1864-A01-060: Red/Black; IA0-1864-A01-089: Silver/Black; IA0-1864-A01-171: Black/silver; IA0-1864-A01-178: Black/Yellow; IA0-1864-A01-244: Navy Blue/Cyan. OMP TECHNICA HYBRID RACE SUIT SIZE CHART

Sparco Extrema S Driver Race Suit  SAVE $$$ The The Sparco Extrema-S racing suit takes the same patented Hocotex material used in the successful Eagle line and presents in a classically styled suit. Three times as breathable as a traditional layered racing suit, 360 degree floating arm gussets are combined with a stretch back panel for maximum flexibility and comfort. Extra flat seams provide additional comfort, while traditional design touches such as classic Sparco epaulletes and seamless ankle/wrist cuffs make this suit a perfect platform for sponsor logos!How does Hocotex work? Racing suits are traditionally constructed using layers of fabric sewn together with a quilted pattern. This quilting creates pockets of air between the layers which expands in a fire, providing thermal protection for the driver. Hocotex uses a honeycomb structure with over 60,000 internal air cells that provide a 10 to 12% increase in heat protection. Compare this to the 300 quilted chambers found in a traditional suit and the difference is clear! SPARCO EXTREMA S RACE SUIT TECHNOLOGY: The suit weighs only 290/320 gr per square meter. Pre-curved Arms and Legs Strategic Stretch panels  Seamless arm and leg cuffs Available in white or black Available in sizes 48-66 FIA 8856-2000 Approved. Sparco Extrema S Race Suit Size Chart    

Sparco X-Light Driver Race Suit Extra Savings On An Exceptional Fire Suit The hallmark of the Sparco X-Light race suit is its innovative design with an extra focus on comfort. The X-Light race suit pushes the boundaries of Sparco’s revolutionary lightweight race suit design, using a lightweight Nomex outer layer along with an ultra-soft inner layer which provides superior fire protection with a comfortable feel. The Sparco X-Light features stretch panel technology from Sparco's Hocotex™ Eagle suit. This specially-engineered stretch fabric is lighter and more durable than traditional elastic fabric. The Sparco X-Light race suit has pre-curved fully floating sleeves with stretch elbow panels, multi directional back stretch panels along with full side stretch panels that run from under the arm to the thighs. The X-Light race suit has another unique feature which is a breathable stretch panel that runs from inner thigh to inner thigh. The X-Light suit has the most stretch panels of any Sparco suit which gives ultimate comfort in the seated driving position. The X-Light is available in five colors in sizes from 48-66. The X-Light race suit is FIA 8856-2000 approved. Sparco X-Light Race Suit Details Lightweight fabric weighs only 270g/m2 Three-layer construction for maximum protection Pre-curved arms with elbow stretch panels Fully floating knit sleeves Multi-directional back stretch panels creates a full floating upper Full side stretch panel Inner thigh stretch panel FIA 8856-2000 approved

Alpinestars Atom Graphic 4 Driver Race Suit The Atom auto racing suit has a two-layer construction with a soft knitted liner for optimum levels of protection, and driver comfort. With a twill outershell and aramid lining for comfort and breathability, this suit is also equipped with a fully floating arm construction, pre-curved arms and legs, and stretch panels on crotch, back and waist for an optimized fit.  NOTE: FIA Suits have regular cuff bottom leg construction ALPINESTARS ATOM GRAPHIC 4 DRIVER RACE SUIT FEATURES Certified to FIA 8856-2018 Two-layer suit incorporating knitted stretchable panels for maximum comfort and excellent breathability. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. ALPINESTARS ATOM GRAPHIC 4 DRIVER RACE SUIT CONSTRUCTION Aramidic knitted stretchable panels on the back, waist and crotch for enhanced comfort and ease of movement. Ergonomic collar with a soft stretchable insert for extended coverage and maximum driver comfort. 100% aramidic outershell fabric for exceptional heat and flame-resistant proprieties. Adjustable belted waist ensures a precise fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash. Ribbed, stretchable wrists and cuffs for optimum comfort. Premium YKK double slidered metal zipper for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Regular fit design. Weight 420 g/m2 SKU: 3352523-1972

OMP FIRST ELLE Women's Race Suit FIA 8856-2018 HOMOLOGATED OMP's revised entry-level FIRST ELLE Racing suit for women is improved with all-new lightweight fabrics, while still maintaining its popular classic style. Its durable fire-retardant exterior is matched to a soft, knitted inner layer for improved comfort and durability. The high-quality Italian construction uses ultra-flat internal seams to prevent rubbing, and features an elastic knitted lower-back insert for improved comfort and mobility.  Two-tone design featuring an excellent quality/comfort/price ratio. External layer in aramidic fiber for high use and washing resistance, inner fabric in soft knitted material. Floating sleeves, antirubbing ultra flat seams. Elastic inserts on the back for better comfort and flexibility. Breathable inserts on the sleeves. SPECIAL SHAPE JUST FOR WOMEN. FIA 8856-2018 HOMOLOGATION Lighter weight than previous versions of OMP's FIRST ELLE, the new design includes full-floating arms for greater freedom of movement, and modern "fishbone" quilting to match the driver's ergonomics in a seated position. OMP FIRST ELLE RACE SUIT PROTECTION Certified to FIA 8856-2018 homologation standard Lightweight and breathable two-layer suit OMP FIRST ELLE KEY FEATURES Two-layer suit construction Soft-knitted inner material Floating arms with elastic bellows Ultra-flat anti rubbing seams Classic-fit design. Weight: 385 g/m2

Alpinestars Atom Graphic Race Suit Boot Cuff The Atom Graphic boot cuff race suit has a two-layer construction with a soft knitted liner for optimum levels of protection, and driver comfort. With a twill outershell and aramid lining for comfort and breathability, this race suit is also equipped with a fully floating arm construction, pre-curved arms and legs, and stretch panels on crotch, back and waist for an optimized fit.  Note: SFI-rated Alpinestars Atom race suits have a boot-cuff leg bottom. ALPINESTARS ATOM GRAPHIC BOOTCUT RACE SUIT FEATURES Certified to SFI 3.2A/5 HOMOLOGATION Two-layer suit incorporating knitted stretchable panels for maximum comfort and excellent breathability. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. SKU 3352622-1056 ALPINESTARS ATOM GRAPHIC BOOTCUT RACE SUIT  CONSTRUCTION Aramidic knitted stretchable panels on the back, waist and crotch for enhanced comfort and ease of movement. Ergonomic collar with a soft stretchable insert for extended coverage and maximum driver comfort. 100% aramidic outershell fabric for exceptional heat and flame-resistant proprieties. Adjustable belted waist ensures a precise fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash. Ribbed, stretchable wrists and cuffs for optimum comfort. Premium YKK double slidered metal zipper for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Regular fit design. Weight 420 g/m2

Sparco Futura Driver Racing Suit With over 45 years of experience developing racing products, Sparco has produced the first ever line of Environmentally Conscious racing products. The ‘FULL EFFICIENCY” life cycle was developed by the continuous work of our R&D team, alongside extensive Life Cycle Assessment (LCA) certifications. By reviewing the manufacturing process to achieve “zero waste”, we are regenerating the excess material sections that are normally discarded. Sparco has created innovative techniques for spinning and weaving these fibers. The Full Efficiency project represents Sparco’s commitment to creating a virtuous production cycle, where at least 51% of production is from regenerated materials.     SPARCO PROPRIETARY TECHNOLOGY Life Cycle Assessment (LCA) Certified Fully controlled textile supply chain with innovative techniques for the spinning and weaving of regenerated fibers Zero Waste Target  FUTURA DRIVER RACE SUIT CONSTRUCTION The Sparco Futura suit is the first racing suit in the world that is constructed with Sparco Full Efficiency technology. The Futura is made with 70% of Full Efficiency regenerated fabric. The mid liner, inner liner as well as the epaulets, arm and knee reinforcements are made with Full Efficiency regenerated fabric. The Futura offers tremendous fire protection, style and comfort. It has pre-curved full floating sleeves and large rear stretch panel for mobility and comfort in the driving position. Futura is available in four colorways and in sizes EU48-66 / US38-56. FIA 8856-2018 approved. SKU 001155 FUTURA DRIVER RACE SUIT TECHNOLOGY Made with 70% Full Efficiency regenerated fabric Soft and Lightweight Pre-curved arms Full floating sleeves Large stretch panel FIA 8856-2018 approved   SPARCO FUTURA SIZE CHART

Sparco Sprint Pro Race Suit The Sparco Sprint Pro race suit is the latest evolution of the legendary Sprint, redesigned to incorporate significant upgrades. The Sparco Sprint has always offered tremendous fire protection, style and value. The new two-layer construction is lighter and more breathable than the previous model. The Sprint Pro has pre-curved, fully-floating sleeves and multiple stretch panels throughout for better breathability, mobility and comfort. The Sparco Sprint Pro is designed as a classic mono-color suit with dynamic contrasting colors on the side. It is available in sizes EU46 to EU66. Sparco Sprint Pro Race Suit Details: SFI 3.2A/5 and FIA 8856-2018 approved Fully-floating sleeves Pre-curved arms Ultra-soft knit arm and leg cuffs (under the outer fabric on the boot cuff) Multiple stretch panels for comfort Available in standard or boot cuff

Alpinestars Atom Driver Race Suit The Atom race suit has a two-layer construction with a soft knitted liner for optimum levels of protection, and driver comfort. With a twill outershell and aramid lining for comfort and breathability, this suit is also equipped with a fully floating arm construction, pre-curved arms and legs, and stretch panels on crotch, back and waist for an optimized fit. Note: FIA-rated versions have a standard leg cuff bottom, SFI-rated suits have a boot cuff leg bottom. ALPINESTARS ATOM RACE SUIT FEATURES Certified to either the new FIA 8856-2018 homologation standard or SFI 3.2A/5. Two-layer suit incorporating knitted stretchable panels for maximum comfort and excellent breathability. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. SKU 3352822 ALPINESTARS ATOM RACE SUIT CONSTRUCTION Aramidic knitted stretchable panels on the back, waist and crotch for enhanced comfort and ease of movement. Ergonomic collar with a soft stretchable insert for extended coverage and maximum driver comfort. 100% aramidic outer shell fabric for exceptional heat and flame-resistant proprieties. Adjustable belted waist ensures a precise fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash. Ribbed, stretchable wrists and cuffs for optimum comfort. Premium YKK double slidered metal zipper for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Regular fit design. Weight 420 g/m2