Closeout Products

Schroth Profi II ASM 4 Point Harness (Anti-Sub) 2028 Expiry The Schroth Profi II ASM 4 Point Harness (Anti-Sub) integrates Schroth’s unique ASM (Anti-SubMarining) technology in a four-point system. The ideal harness for stock seats, or seats not designed for a pass-through for a sub strap, that are used in Driver Education programs. Schroth’s ASM is an extra fold of material sewn into the inboard shoulder belt, elongating at a separate rate compared to the outboard belt. This allows two movements: the upper torso can twist slightly, and on the rebound phase, the torso is planted firmly back in the seat instead of sliding under the lap belt. The Schroth Profi II ASM 4 Point Harness is good for use with a HANS device or other Head and Neck Restraint (HNR). The ASM shoulder strap on the ASM is 3” width, which will work with any HNR. A dual or single strap can be added to convert this belt into a 5- or 6- point system. The shoulders are ready to wrap around a roll bar, and snap-in or bolt-in attachments can be purchased. The Schroth Profi II ASM 4 Point Harness also features a “Flex Belt.” Instead of being sewn into the harness, the cam latches and end fittings are wrapped, making configuration changes from a Pull-Up to a Pull-Down configuration quick and easy. In addition to helping you customize the use of your device for your particular situation, you can add bolt-in brackets to be wrapped in the lap belts. Snap-in brackets are standard on the lap belts. Choose from Black, Blue, or Red! Be sure to specify Driver or Passenger side as the construction is slightly different for each. See Schroth Harness Installation Checklist Here

Sparco Air Pro RF-5W 1977 Sparco Air Pro RF-5W 1977 Helmet: Vintage Vibes with Futuristic Safety Hey speedster, ever thought of time-traveling? Well, we can't quite offer you a DeLorean, but how about racing with the soul of the '70s and the tech of 2023? Dive into the Sparco Air Pro RF-5W 1977. This isn't just a helmet; it's a nod to history with the perks of the future! Back in the day, Sparco took its first baby steps. Fast forward 40+ years of wind tunnel hairdos, carbon-Kevlar hugs, and the relentless pursuit of perfection, and here we are! This baby is crafted with over four decades of research, development, and some serious love for the track. With the challenges of the new Snell SA2020 and FIA 8859-2015 standards, the Sparco team pulled up their sleeves (and goggles) to introduce innovations in safety and comfort. Oh, and did we mention? There’s a fresh Medium/Large size. So, if you’re ever in that in-between stage of ‘Is it snug? Or is it too tight?’—we gotcha! Now, Let's Break it Down: Retro Love: A painted retro design that screams 1977 with a clear coat finish. Choose from red or blue stripes, and let the raceway know you’ve got style. Rock-Solid Yet Light: Carbon-Kevlar/fiberglass combo, because your head deserves nothing but the best. Vents Galore: Designed with a wind-tunnel-honed aerodynamic edge, because why should your car have all the fun? No More Foggy Days: Multiple channels direct air to the visor ensuring you see the finish line (and the competition you leave behind) crystal clear. Comfort Is King: Removable, washable, and repositionable padding with no pesky seams to annoy your racer's soul. Extras? Yes, Please!: Accommodates drink tubes, an intercom system, and comes with those sleek anodized aluminum chin strap hardware. Oh la la! Specifications at a Glance: Painted Retro design - because we adore nostalgia. Light-weight carbon-Kevlar/fiberglass fusion for durability without the drag. The fantastic M/L size in our sleeker shell. All the bells and whistles: anti-fog channels, pre-molded interiors, and approval by SNELL SA2020 and FIA 8859-2015. Race enthusiasts, if you’re looking to grab a piece of history, turn heads at the track, and rock cutting-edge safety, the Sparco Air Pro RF-5W 1977 is your ticket to the winner’s circle. Ready to own the past and future wrapped in one stunning helmet? Race to 'Add to Cart' and set the tracks on fire, old-school style! The Sparco helmet line is a result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of the new Snell SA2020 and FIA 8859-2015 ratings. The 2020 type-approval introduces new impact requirements, the helmets need to dissipate large amounts of energy in different ways. To meet these requirements Sparco is introducing new innovations for driver safety and comfort. All shells now have layers of carbon-Kevlar for greater strength. The helmets have also been wind-tunnel tested to maximize exterior vent placement and flow. The EPS interiors and padding have also been redesigned for increased airflow and driver comfort. Sparco also introduces a new size: Medium/Large. This M/L size takes advantage of using the smaller shell which is lighter and more compact. SPARCO AIR PRO 1977 AUTO RACING HELMET The Sparco Air Pro 1977 is a painted version of the Sparco Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes and has a clear coat painted over. The Sparco Air Pro 1977 features a carbon-Kevlar/fiberglass construction. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. The Sparco Air Pro 1977 has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Sparco Air Pro 1977 has been designed to accommodate a drink tube and an intercom system. Available in white with blue or red stripes. Sizes XS to XXL (including size M/L). Sparco Air Pro 1977 has Hans clips pre-installed. SNELL SA2020 and FIA 8859-2015 approved. SPARCO AIR PRO RF-5W TECHNOLOGY Painted Retro design Light-weight carbon-Kevlar/fiberglass construction New Medium/Large size which uses the lighter and more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system SNELL SA2020 and FIA 8859-2015 approved An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest. We take immense pride in offering a wide selection of Sparco auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Sparco has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world. Key Features of Sparco Racing Helmets: Unparalleled Safety: Sparco racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions. Premium Materials: Crafted with precision, Sparco helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection. Comfort and Fit: Sparco's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit. Aerodynamic Design: Sparco helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track. Frequently Asked Questions About Sparco Helmets: Where are Sparco helmets made? Sparco helmets are proudly manufactured in Italy, maintaining the highest quality standards. Is Sparco a good helmet brand? Yes, Sparco is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Sparco helmets Snell approved? Yes, many Sparco helmets are Snell approved, meeting rigorous safety standards. Are Sparco helmets FIA approved? Absolutely, several Sparco helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Sparco helmets run small? Sparco offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Sparco auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Sparco Racing Helmets: Sparco Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Sparco Racing Helmet to suit your racing needs. Sparco Racing Helmet: Each Sparco Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Sparco Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Sparco Race Helmets: Sparco Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Sparco has race helmets tailored for your specific discipline. Sparco Race Helmet: Your Sparco Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Sparco  Race Helmet helps reduce wind resistance, giving you a competitive edge. Sparco Helmet: A Sparco Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Sparco Helmets: Sparco Helmets have a rich history of innovation and excellence. The extensive range of Sparco Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Sparco Carbon Fiber Helmet: Sparco Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Sparco's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Sparco Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Sparco Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Sparco Racing: Sparco Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Sparco Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Auto Racing Helmets: Auto racing helmets from Sparco are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.

Sparco Arrow Nomex Gloves The Sparco Arrow racing glove provides incredible grip and superior comfort. The palm is printed with high-grip HTX, a Sparco patented material that increases grip, comfort and dexterity. HTX is strategically placed for maximum steering feel and performance. Another Sparco-exclusive feature is Touch-S technology, a Touch Sensitive index finger and thumb. Sparco's patented fire resistant touch sensitive material allows you to use your touch screen data acquisition electronics or phone lap timer apps without taking off your gloves. The Arrow is ultra-lightweight with pre-curved fingers, external stitching and a unique inner thumb seam that gives unparalleled comfort on long stints. Available in Black/White, Black/Red, Navy, White, and Red. The Sparco Arrow is both FIA and SFI approved. SPARCO ARROW NOMEX GLOVE TECHNOLOGY  Touch Sensitive finger tips compatible with touch screen data acquisition and lap timer apps Anatomically correct seamless palm that contours to the natural shape of the hand Printed high-grip HTX palm, a Sparco-exclusive material that increases grip, comfort and dexterity External seams and unique inner thumb seam for extreme comfort FIA and SFI approved

Sparco Arrow-K Kart Racing Glove The Arrow-K is a boldly styled karting glove that provides incredible grip and superior comfort. Featuring an anatomically correct seamless palm that contours to the natural shape of the hand, the palm of the Arrow-K glove uses an Ultra Grip silicon palm that increases grip, comfort and dexterity. The Arrow-K has exclusive touch sensitive index finger and thumb for use with touch screen electronic devices such as data logging. The Arrow-K is an ultra-lightweight glove made with wear-resistant polyamide fabric with external seams for comfort. SPARCO ARROW-K KART RACING GLOVE TECHNOLOGY Anatomically correct seamless palm that contours to the natural shape of the hand Touch Sensitive index and thumb for touch screen devices External seams and high contrast palm and finger grips with premium silver accents

Sparco Circuit / Circuit II Carbon Fiber Racing Seat 2028 Expiry The Sparco Circuit Carbon is the carbon fiber version of the Circuit QRT which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit Carbon includes integrated bolsters to protect the head from lateral impacts. This seat can be used with an FHR (frontal head restraint) device for even greater protection. The ultra-light shell is features impact-absorbing material surround on the headrest. It has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The Circuit Carbon is FIA 8859-1999 approved. SPARCO CIRCUIT CARBON FIBER RACE SEAT TECHNOLOGY Ultralight Pre-Preg Carbon Fiber shellExcellent fitment (for a head restraint seat) into smaller cockpitsExcellent ergonomicsFire-retardant fabricSpecial non-slip fabricFIA 8859-1999 The Sparco Circuit Carbon Fiber is an ultra-light competition seat specifically designed for circuit use. Made from carbon fiber, the Sparco Circuit Carbon Fiber has an ultra-light shell. The Sparco Circuit Carbon Fiber includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.  The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit Carbon Fiber is FIA approved and available in two sizes: Circuit (Standard) and Circuit II (Large). The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear.  SPARCO CIRCUIT CARBON FIBER RACE SEAT SIZING Small / Narrow – up to a 32” waist (pants size)  SPARCO CIRCUIT II CARBON FIBER RACE SEAT SIZING Medium – up to a 36” waist (pants size)  

Sparco Competition USA Race Suit Sparco's Competition line of racing suits continues the Sparco tradition of creating unmatched value in lightweight & breathable suit technology to the masses! Available exclusively in the United States, the 3-layer racing suit shares all of the same great features of the Euro-only Competition+ suit but with an SFI 3.2a/5 rating and an affordable price. Constructed from the latest fire retardant fabrics, the soft and lightweight suit offers the same weight and feel of the X-Light suit from years past. All new Monaco fabric is added to the side panels and under the arms to greatly increase breathability, while stretch panels keep things comfortable. The Competition USA suit is finished with stylized quilting through the torso for improved ergonomics and appearance, as well as a minimalist, lightweight collar, pre-formed sleeves, and adjustable belt. Available in 4 bold colors, the clean and linear styling works to enhance the fit and figure of anyone wearing the suit!. Rated SFI 3.2A/5 SPARCO COMPETITION USA DRIVER RACE SUIT TECHNOLOGY Lightweight and Comfortable 3-layer fabric Pre-curved arms with elbow stretch panels Fully floating knit sleeves Multi-direction back stretch panels creates a full floating upper Full side stretch panel Inner thigh stretch panel SFI approved SPARCO COMPETITION USA RACE SUIT SIZE CHART    

Sparco Eagle LT Race Suit  The Eagle LT race suit is a limited-edition suit available only for the US market. The Eagle LT race suit features an all-new design in two colorways. This is a limited edition suit so only available while supplies last. SINGLE LAYER CONSTRUCTION, MULTI-LAYER PROTECTION The Eagle LT race suit is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle LT race suit is FIA approved. SPARCO EAGLE LT RACE SUIT UNPRECEDENTED COMFORT Thanks to HOCOTEX®, the Eagle LT race suit is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle LT race suit ultimate flexibility and comfort. The Eagle LT race suit uses a new stretch material called Eagle fabric. This Eagle Fabric is lighter, more breathable and abrasion resistant than the traditional stretch material. SPARCO EAGLE LT RACE SUIT IMPROVED FIRE RESISTANCE Traditional racing suits have layers of fabric sewn together with a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle LT has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance. SPARCO EAGLE LT RACE SUIT TECHNOLOGY Single layer construction, multi-layer protection Three times more breathable than a standard suit Full 360o arm gussets Large stretch panels on the sides and back with new breathable fabric Three years of research and development HOCOTEX® patented Sparco technology, made in Italy FIA approved SPARCO EAGLE LT RACE SUIT SIZE CHART      

Sparco Eagle RS8.2 Driver Race Suit The Sparco Eagle RS-8.2 race suit uses a combination of HOCOTEX and Eagle fabrics to produce an ultra lightweight and breathable race suit. With the aim of obtaining a closer and more modern fit, preformed armholes have been used, and, in line with the requirements linked to driver mobility during a race, the elasticized panels have been optimized (armholes, sides and elasticized back). The main structure of the Sparco Eagle RS8.2 race suit, like in the previous version, is the tried and tested characteristic HOCOTEX, (single-layer weave of 0.6mm ultra-thin fabric), combined with other accessory fabrics like Sparco's Eagle elasticized fabric (well-known and used in various Sparco race suit models), and panels in contrast in flat, ultra-light cloth for anti-abrasion reinforcements on the legs and arms. Stitched quilting made with thin yarn, concealed pockets, a pre-formed neck, and belt with the characteristic Sparco logo round out the functional features of the Sparco Eagle RS8.2. SPARCO EAGLE RS 8.2 RACE SUIT DETAILS This suit weighs between 290 and 320 grams per square meter Pre-curved arms and legs prevent material bunching and pulling when in the driving position Strategic stretch panels throughout Available in sizes EU64 and EU66 only FIA 8856-2000 homologation

Sparco EVO Carbon Fiber Racing Seats 2028 Expiry   As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsFire retardant fabricSpecial non-slip fabricFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco EVO Performance Carbon Fiber Racing Seats 2028 Expiry   The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track.  Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsLeather and Alcantara UpholsteryFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco EVO Performance Carbon Fiber Racing Seats 2028 Expiry   The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track.  Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:EVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) EVO QRT Racing Seat Technology Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsLeather and Alcantara UpholsteryFIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions EVO Std Dimensions:   EVO L / XL Dimensions:

Sparco EVO QRT Performance Racing Seats 2028 Expiry The Performance version of the Evo brings the famous Sparco Seat to the top with leather and alcantara upholstery.  Looks as good on the street as on the track.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the  Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo QRT fits perfectly in a Miata!), the Sparco Evo QRT is sure be a mainstay at the track! The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The Sparco EVO QRT is FIA approved. The  Sparco EVO QRT Racing Seat SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO S – Small (up to 32” waist) EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) WHAT IS SPARCO QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. The  Sparco EVO QRT Racing Seat TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 4 Sizes: Small through XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved The  Sparco EVO QRT Racing Seat DIMENSIONS EVO S Dimensions:     EVO Std Dimensions: EVO L / XL Dimensions:

Sparco EVO QRT Racing Seats 2029 Expiry As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the  Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo QRT fits perfectly in a Miata!), the Sparco Evo QRT is sure be a mainstay at the track! The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The Sparco EVO QRT is FIA approved. The  Sparco EVO QRT Racing Seat SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO S – Small (up to 32” waist) EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) WHAT IS SPARCO QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. The  Sparco EVO QRT Racing Seat TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 4 Sizes: Small through XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved The  Sparco EVO QRT Racing Seat DIMENSIONS EVO S Dimensions:     EVO Std Dimensions: EVO L / XL Dimensions:

Sparco EVO QRT Off-Road Racing Seats 2029 Expiry Designed for off-road and UTV market applications where you need a seat that looks great, is light, strong, and water-proof, the Evo X features Sparco's exclusive waterproof fabric covering the popular Evo L QRT seat shell.  The compact size of the Evo works perfectly for a UTV application.  As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With UTV's and Off-road vehicles in mind, the Sparco Evo QRT is sure be a mainstay out in the wild! The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in water-proof materials. The Sparco EVO QRT is FIA approved. The  Sparco EVO QRT Racing Seat Sizing The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. The  Sparco EVO QRT Racing Seat Technology QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 3 Sizes: Standard through XL Excellent ergonomics Fire retardant fabric Special water-proof non-slip fabric FIA approved Sparco EVO QRT Off-Road Racing Seat Dimensions   EVO Std Dimensions: EVO L / XL Dimensions:

Sparco Extrema S Driver Race Suit  SAVE $$$ The The Sparco Extrema-S racing suit takes the same patented Hocotex material used in the successful Eagle line and presents in a classically styled suit. Three times as breathable as a traditional layered racing suit, 360 degree floating arm gussets are combined with a stretch back panel for maximum flexibility and comfort. Extra flat seams provide additional comfort, while traditional design touches such as classic Sparco epaulletes and seamless ankle/wrist cuffs make this suit a perfect platform for sponsor logos!How does Hocotex work? Racing suits are traditionally constructed using layers of fabric sewn together with a quilted pattern. This quilting creates pockets of air between the layers which expands in a fire, providing thermal protection for the driver. Hocotex uses a honeycomb structure with over 60,000 internal air cells that provide a 10 to 12% increase in heat protection. Compare this to the 300 quilted chambers found in a traditional suit and the difference is clear! SPARCO EXTREMA S RACE SUIT TECHNOLOGY: The suit weighs only 290/320 gr per square meter. Pre-curved Arms and Legs Strategic Stretch panels  Seamless arm and leg cuffs Available in white or black Available in sizes 48-66 FIA 8856-2000 Approved. Sparco Extrema S Race Suit Size Chart    

Sparco Grid Q Racing Seat 2029 Expiry The Sparco GRID Q was designed to provide the ultimate lateral support, racing ergonomics and safety. This unique design incorporates individual padding that is attached by Velcro. This padding design allows for ventilation channels. The  Sparco GRID Q features a brand new shell design that has deep side bolsters and very supportive shoulder bolsters for excellent lateral hold. In addition to the unique padding and shell design, the Sparco Grid Q is now made with Sparco QRT Technology which results in an ultra-light shell. The side cushion can be removed to give more room for a larger fit. The Sparco Grid Q features harness slots that can accommodate a large range of drivers. The Sparco Grid Q is FIA approved.  This lightweight shell is wrapped with impact-absorbing foam and covered with fire retardant, self-extinguishing fabric. The seat is finished with a unique padding system that is made up of several individual pads attached by Velcro. These pads not only allow for a customized fit, but create natural ventilation channels on the seating surface for unsurpassed cooling on hot days. SPARCO QRT TECHNOLOGY QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach the weight of carbon fiber seat at the price of a fiberglass composite seat. Sparco Grid Q Features QRT Technology – 30% Weight savings Ultra-light fiberglass composite shell Harness slots that can accommodate a wide range of drivers Removable padding Hans device compatible Fire retardant fabric Special non-slip fabric Sparco Grid Q Dimensions