Data Logging & Video

AiM Sports GPS09C Module The GPS09C module from AiM further expands the track mapping abilities of AiM data loggers and dash loggers. In addition, the GPS09C allows lap timing (even split times) without the use of trackside beacons, storing data for as many as 50 race tracks and up to five splits per track. The GPS09C can also calculate and log speed, lateral and longitudinal g-forces, and of course vehicle position. The AiM GPS09CC is the basis of lap time and split time calculations in all AiM systems. These systems come with start/finish line coordinates for more than four thousand race tracks, so your dash or logger automatically recognizes the track you are racing on and will calculate lap times and split times. If the track you're on is not in the database, your system will recognizes a new track and then will calculate lap times. High 25 Hz Sampling and Exceptional Accuracy The GPS09C is the latest version, boasting a quicker 25 Hz sampling rate (up from 10 Hz) and positional accuracy to less than one foot (down from over six feet). It also takes full advantage of Race Studio 3 integration of GPS, video, and data. Simple to install: Just connect the CAN cable to your dash and mount the AiM GPS09C antenna to your vehicle. The Standard Version is magnetic-backed and can be installed inside the cabin or on the vehicle exterior. The Roof Version is designed to run the cable through an exterior panel for a clean, secure, more permanent installation. The GPS09C will automatically configure itself during start-up! The AiM GPS09C connects via a 5-pin Binder 712 screw-in connector. Choose a cable length to suit your installation: 0.5m (1.6 ft), 1.3m (4.3 ft) is appropriate for most formula cars and motorcycles; 2.0m (6.6ft) and 4.0m (13.1 ft) are suitable for most sports cars and sedans. AiM GPS09C Module Compatibility MX Series: MXS, MXP, MXG, MXT SmartyCam Series1: Sport, Corsa, GP, Dual Loggers:1: Evo S, Evo 5 Lap Timer: Solo2 DL Power Distribution Modules: PDM32, PDM08 1 not compatible with Pro and Pro Open versions

AiM ACC3 Analog CAN Converter This compact CAN device provides virtually endless options to expand your vehicle data acquisition system. The AiM ACC3 adds up to four freely-configurable analog (or two digital and two analog) channels without occupying or modifying any of the existing system channels.  * Not compatible with MXL2, MXS and MXG. Features:  Analog channels 4 fully configurable channels, 200 Hz each: TC, TR, 0÷5 V, 0÷12 V  Speed inputs 2 (AN3-AN4), max frequency 10 kHz, internal pull-up for open drain/collector input  External power 9÷15 V  Connection 1 Analog 8 pins Binder 712+ AiM CAN 5 pins Binder 712  Material PA6 30% glass  Dimensions 44.0 x 38.0 x 19.8 mm  Weight 50 g  Waterproof IP65   SENSORS CONNECTIONS They can manage many different sensors, from thermocouples to sensors whose output is 0÷12V.Please, note that the thermocouples require dedicated compensated cables, so different kits and different harnesses and cables are available.

AiM Sports Channel Expansion Hub This compact CAN device provides virtually endless options to expand your vehicle data acquisition system. The AiM Sports Channel Expansion Hub adds up to four freely-configurable analog (or two digital and two analog) channels without occupying or modifying any of the existing system channels. By using advanced CAN technology, wiring is simplified from four cables into just a single connection, thereby reducing unnecessary points of possible failure. Using the AiM Sports Data Hub, it's possible to connect to as many of these Channel Expansion Hubs as needed.

AiM MyChron Expansion The AiM MyChron Expansion is an add-on for MyChron4 or MyChron5 Data Logging karting dashes. It plugs into the CAN expansion port on your MyChron dash to expand its capabilities. The Expansion has a single CAN expansion port plus four additional sensor inputs. All four inputs can accept common karting sensors (brake/throttle pedal position, temperature, steering angle, etc.). One of the four inputs can accept a speed sensor instead. Requires an external 12-volt power source such as your kart's battery. The MyChron Expansion channel multiplier improves MyChron5 and MyChron5 2T (and also MyChron4 and MyChron4 2T) performance, thanks to four additional channels and a further CAN bus connector. Through this last connector, the systems can be connected to LCU-One Lambda controller and SmartyCam HD (and to GPS and Data key for MyChron4 systems). Thanks to its specific wirings, MyChron Expansion powers the systems and their peripherals with an external battery, avoiding internal battery consumption. All channels are easily configurable as analog through the system menu to sample data coming from: Exhaust gas valve position sensor (very important to understand at which RPM value the exhaust port opens) Wheel speed sensor: the first input on the left can be configured also as digital input No contact brake pedal position sensor No contact throttle pedal position sensor Brake pressure sensor Water temperature or cylinder head temperature (PT100 thermo-resistor only) Steering angle potentiometer (to highlight over/under steering situations) Brake pedal potentiometer Throttle pedal potentiometer MyChron Expansion is an excellent value-for-money instrument for professional karting analysis. Call us with any questions you have about the MyChron Expansion from AiM Sports! AiM MyChron5 sold separately.

AiM ECU Bridge with OBDII Connector Connecting to your vehicle's ECU gives your AiM dash/data-logger access to data collected by your ECU (RPM, vehicle speed, coolant temperature, throttle position, and much more). The AiM ECU Bridge works with all AiM units with a male 5-pin Binder 712 connector, including the MXG, MXS, MSM, MXL, MXL Pro Dash Display, G-Dash Display, and Formula Car Wheel Display. SmartyCam connection requires an AiM 7-pin to 5-pin CAN cable included with the SmartyCam. AiM ECU BRIDGE WITH OBDII CONNECTOR DETAILS Manufacturer: AiM Sports Manufacturer part no: X90BGCK12MA Connector 1: OBDII Connector 2: Binder 712 5-pin, male Power cable: car lighter plug for 12VDC connection USB port for PC communication The AiM ECU Bridge features a USB port for easy connection to your computer for set-up. The AiM ECU Bridge has to be configured using RaceStudio 3 software to communicate with the different dashes, cameras, etc., on one side and the ECU on the other side. TYPICAL ECU DATA FROM OBDII PORT RPM Vehicle speed Engine coolant temperature Throttle position sensor Intake air temperature Manifold air pressure Manifold air flow Fuel level Pedal position sensor

AiM ECU Bridge with RS232/CAN Wiring Connecting to your vehicle's ECU through the CAN bus allows your AiM dash/data-logger to tap into a very wide array of data collected by your ECU. The AiM ECU Bridge with RS232/CAN Wiring works with the following AiM displays with a male Binder 712 5-pin CAN connector: MXG MXS MXT MXP MXm SW4 Steering Wheel Connecting a SmartyCam requires the AiM 7-pin to 5-pin CAN cable included with the SmartyCam. The ECU Bridge also features a special port for a USB cable (included) for easy connection to your computer for set-up. ECU Bridge has a CAN/RS232 connection for direct connection to many aftermarket ECUs. AiM has developed hundreds of different protocols to make compatibility with virtually any ECU possible, stock or aftermarket. The AiM ECU Bridge has to be properly configured with RaceStudio 3 software to communicate with the different dashes, cameras. etc., on one side and your ECU on the other side.

AiM Memory Module for AiM Devices Use SD memory cards1 effortlessly to keep your driver data more organized. This unit allows you to easily swap memory cards in and out to view driver data more efficiently between stints. Using the AiM Memory Module is really simple: just connect the Module to your device and data will be saved simultaneously both in the data-logger and on the SD card. No configuration is needed. The SD card can be removed and replaced even during pit stops, while the car engine is still on, making it extremely fast to get data during endurance races or long tests, when the time in the paddock is really limited. When the session is over, all you need to do is move the SD card from the AiM Memory Module to your PC and download the data using RaceStudio 3. The Module features a front LED showing its recording/updating status. The AiM Memory Module can support up to 32GB SD cards. AiM MEMORY MODULE FOR AiM DEVICES DETAILS Manufacturer: AiM Sports Manufacturer part no: X08MMD040 Cable length: 40cm (16 in.) SD card 1: up to 32GB Power consumption: 50 mA Dimensions: 55.5 x 78.3 x 18mm (2.2 x 3.1 x 0.7 in.) Weight: 103g (3.5 oz.) Waterproof: IP65 CONNECTS VIA CAN BUS TO THESE AiM DEVICES MXL2 MXG (1st gen) MXS (1st gen) EVO4S EVO5S MXT 1.3 MXG 1.3 MXP 1.3 MXS 1.3 PDM08 PDM32 1 SD card is not included

AiM OBDII Harness for MX-Series 1.2 Strada Dashes This OBDII harness from AiM Sports is compatible with the AiM MXS 1.2 Strada, MXP 1.2 Strada, and MXG 1.2 Strada street dashes1. Designed to seamlessly connect via a 14-pin AMP connector on the rear of the dash, this harness ensures efficient power, ground, USB, and CAN connections. Additionally, it facilitates a direct ECU link through the vehicle's OBDII diagnostic port. Ideal for production vehicles equipped with an OBDII port, the harness supports both CAN and K-Line communication standards. 1 AiM MX Strada Series dash sold separately

AiM Data Hub Connects SmartyCam 2.0 & Older to GPS09C Connect the latest AiM GPS09C GPS module to a stand-alone SmartyCam HD or GP-HD (prior to version 2.1) with this special AiM powered data hub. AiM DATA HUB OLDER SMARTYCAM TO GPS09C DETAILS Manufacturer: AiM Sports Manufacturer part no: X08HB2GK3 Wiring leads 1: Red (12VDC) Wiring lead 2: Black (ground) Port 1: Female Binder 712 5-pin Port 2: Female Binder 712 5-Pin ADD GPS TO YOUR OLDER SMARTYCAM The AiM SmartyCam HD and SmartyCam GP-HD (prior to version 2.1) were designed to work with dedicated SmartyCam GPS modules, especially when the camera was used as a stand-alone unit. This older GPS module is no longer available, so the AiM Data Hub allows users needing a GPS module to plug the latest AiM GPS09C directly into their older SmartyCam. This SmartyCam/GPS09C Data Hub hosts both the GPS09C module and the SmartyCam CAN cable via its two Binder 712 5-pin ports. The Data Hub also provides an external 12VDC cable to be connected to a vehicle electrical system. As a modified version, this SmartyCam/GPS Data Hub will not connect to an existing AiM data-logger.

Aim Sports 4-Port Data Hub The acquisition of the essential data you need to evaluate your race car's performance requires the connection of a lot of peripherals to your AiM data-logger. This, in turn, requires a great number of cables. To solve this problem, AiM developed the Data Hub, a CAN connection multiplier that works as an interface between all AiM data-loggers and their various peripherals. Extend the capabilities of your AiM data-logger without occupying any more channels or running more cables to your dash. Each AiM 4-Port CAN Data Hub connects up to four CAN peripherals. You can even stack as many as four AiM Data Hubs, multiplying the number of available connections! Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (thermocouple) Hubs. Any channel can be selected for display on the dash. Includes a 15-inch cable. AiM 4-PORT CAN DATA HUB DETAILS Manufacturer: AiM Sports Manufacturer part no: X08HUB010 Connectors 1-4: Binder 712 5-pin, female (from peripherals) Connector 5: Binder 712 5-pin, male (to dash) Dimensions: 123 x 30 x 23.5mm (4.8 x 1.2 x 0.9 in.) CAN cable length: 40cm (15.75 in.) Weight: 97g (3.4 oz.) Waterproof: IP65 AN EXAMPLE OF A COMPLEX SETUP Let's take a V-8 race car with an AiM MXG 1.3 dash plus the following peripherals: One EGT sensor on every cylinder (8) Two CHT sensors on each cylinder bank (4) One Lambda sensor on each exhaust header (2) One GPS09C module One AiM Memory Key You would need three TC Hubs and two Data Hubs. The EGT and CHT thermocouples would all connect to the three TC Hubs. The TC Hubs and the GPS09C connected to one 4-Port Data Hub. That Data Hub would be connected, the two Lambda controllers, and the Memory Key connect to a second 4-Port Data Hub. And that Data Hub would connect to your AiM MXG 1.3 dash. That's sixteen channels monitored by the MXG 1.3 in addition to the other channels still available. That puts an enormous amount of data  right at your fingertips!

Stilo to IMSA Adapter Cable (Male/Male) This RaceCom cable enables connection between an IMSA helmet kit and a Stilo intercom. All RaceCom cables are built in Mooresville, NC, with U.S. manufactured mil-spec hardware. Every RaceCom cable has been pull-tested by a certified lab to ensure strength and reliability. Their meticulous build process has been proven to outlast and outperform all others in the business. 8 inch coiled cable

Stilo to Sentry Adapter Cable This cable will connect the female comms port on your Stilo GT-style helmet to your Sentry or similar Race Reciever.  Includes 3.5mm (1/8") connector (pinned for listening only) on one end and Stilo male 4C connector on the other. Made in the USA from thin, flexible, ROHS-compliant cable. 3.5mm plug for listening only *Picture below shows multi pin plug.

AiM Sports Temperature Sensor NOTE: Sensors typically take 3 to 5 business days to ship.   Add the appropriate AiM Sports Temperature Sensor to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level!            

AiM K8/K15 Keypad  Button Inserts To order the specific insert you need, write the insert name and part number in the space provided above. These AiM keypad button inserts fit neatly into the buttons on your AiM K8 or K15 CAN keypad. They allow each button's backlight to illuminate a word or symbol that represents that button's function, putting easy keypad function recall at your fingertips. These are a required add-on to operate each button, and are sold individually. Choose among 72 different inserts to create different configurations with the same K8 or K15 keypad based on your needs. AiM K8/K15 Keypad Button Insert Details Manufacturer: AiM Sports Manufacturer part number: LVT60007 Quantity: sold individually Write insert name and part number in the space provided above AiM K8 CAN Keypad is sold separately.