Race Car Brake System Components & Kits at DiscoveryParts – Page 17

Racing Brake Fluid

Brembo Big Brake Upgrades

BMW Racing Brakes

Camaro Racing Brakes

Corvette Racing Brakes

Ferrari Racing Brakes

Ford Racing Brakes

Honda / Acura Racing Brakes

Lamborghini Racing Brakes

McLaren Racing Brakes

Mercedes Racing Brakes

Mitsubishi Racing Brakes

NASA German Touring Series

NASA Spec Series (All)

Nissan Racing Brakes

Porsche Racing Brakes

Subaru Racing Brakes

VW / Audi Racing Brakes

Carbotech Brakes Carbotech Honda S2000 Rear 2000-2009 Brake Pad Set CT537 from $146.00

Carbotech Brake Pads Carbotech Honda S2000 Rear Brake Pads for 2000 - 2009 Honda S2000 in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. [img-12185-left-large_default] How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT537 Material thickness of pad material and backing plate: .570" Material thickness of pad material and backing plate: 14mm Hawk brake cross over: HB145_.570 G-Loc Brake cross over: GLC537 Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT537 Acura Honda Brake Pad Set fits the Rear of: 2016 Acura RDX 43022T0GA01 2016 Acura ILX 43022TR0A01 2015 Honda Crosstour 43022TP6A01 2015 Honda CR-Z 43022SV4A23 2015 Honda CR-V FWD 43022T0GA01 2015 Honda CR-V AWD 43022T0GA01 2015 Honda Civic Si 43022TR0A01 2015 Honda Civic EX 43022TR0A01 2015 Acura RDX 43022T0GA00 2015 Acura ILX 43022TR0A01 2014 Honda Crosstour 43022TP6A00 2014 Honda CR-Z 2014 Honda CR-V FWD 43022T0GA00 2014 Honda CR-V AWD 43022T0GA00 2014 Honda Civic SEDAN EX, EX-L; w/Rear Discs 2014 Honda Civic COUPE EX, EX-L; w/Rear Discs 2014 Acura RDX 43022T0GA00 2014 Acura ILX Hybrid 2014 Acura ILX Hybrid 2014 Acura ILX 2013 Suzuki SX4 AWD 2013 Suzuki SX4 AWD 2013 Suzuki Kizashi 2013 Honda Crosstour 43022TP6A00 2013 Honda CR-Z 2013 Honda CR-V FWD 43022T0GA00 2013 Honda CR-V AWD 43022T0GA00 2013 Honda Civic SEDAN Si; w/Rear Discs 2013 Honda Civic SEDAN EX, EX-L; w/Rear Discs 2013 Honda Civic COUPE Si; w/Rear Discs 2013 Honda Civic COUPE EX, EX-L; w/Rear Discs 2013 Acura RDX 43022T0GA00 2013 Acura ILX Hybrid 2013 Acura ILX Hybrid 2013 Acura ILX 2012 Suzuki SX4 w/Rear Discs 2012 Suzuki SX4 AWD 2012 Suzuki SX4 AWD 2012 Suzuki Kizashi 2012 Honda Crosstour FWD 43022TP6A00 2012 Honda Crosstour AWD 43022TP6A00 2012 Honda CR-Z 2012 Honda CR-V FWD 43022TP6A00 2012 Honda CR-V AWD 43022TP6A00 2012 Honda Civic SEDAN Si; w/Rear Discs 2012 Honda Civic SEDAN EX, EX-L; w/Rear Discs 2012 Honda Civic COUPE Si; w/Rear Discs 2012 Honda Civic COUPE EX, EX-L; w/Rear Discs 2012 Acura RDX FWD, 43022SXS000 2011 Suzuki SX4 w/Rear Discs 2011 Suzuki SX4 AWD 2011 Suzuki SX4 AWD 2011 Suzuki Kizashi 2011 Honda CR-Z 2011 Honda CR-V 43022SXS000 2011 Honda Civic SEDAN Si; w/Rear Discs 2011 Honda Civic SEDAN Hybrid 2011 Honda Civic SEDAN EX, EX-L; w/Rear Discs 2011 Honda Civic COUPE Si; w/Rear Discs 2011 Honda Civic COUPE EX, EX-L; w/Rear Discs 2011 Honda Accord Crosstour FWD 43022TP6A00 2011 Honda Accord Crosstour AWD 43022TP6A00 2011 Acura RDX FWD, 43022SXS000 2010 Suzuki SX4 w/Rear Discs 2010 Suzuki SX4 AWD 2010 Suzuki SX4 AWD 2010 Suzuki Kizashi 2010 Honda CR-V 43022SXS000 2010 Honda Civic SEDAN Si; w/Rear Discs 2010 Honda Civic SEDAN Hybrid 2010 Honda Civic SEDAN EX; w/Rear Discs 2010 Honda Civic COUPE Si; w/Rear Discs 2010 Honda Civic COUPE EX; w/Rear Discs 2010 Honda Accord Crosstour 43022TP6A00 2010 Acura RDX FWD, 43022SXS000 2009 Suzuki SX4 w/Rear Discs 2009 Suzuki SX4 AWD 2009 Suzuki SX4 AWD 2009 Honda S2000 2009 Honda CR-V 43022SXS000 2009 Honda Civic SEDAN Si; w/Rear Discs 2009 Honda Civic SEDAN Hybrid 2009 Honda Civic SEDAN EX; w/Rear Discs 2009 Honda Civic COUPE Si; w/Rear Discs 2009 Honda Civic COUPE EX; w/Rear Discs 2008 Suzuki SX4 w/Rear Discs 2008 Honda S2000 2008 Honda CR-V 43022S9A010 2008 Honda Civic SEDAN Si; w/Rear Discs 2008 Honda Civic SEDAN EX; w/Rear Discs 2008 Honda Civic COUPE Si; 2.0L; w/Rear Discs 2008 Honda Civic COUPE EX; 1.8L; w/Rear Discs 2008 Acura TSX 2007 Suzuki SX4 2007 Honda S2000 2007 Honda CR-V 43022S9A010 2007 Honda Civic SEDAN Si; w/Rear Discs 2007 Honda Civic SEDAN EX; w/Rear Discs 2007 Honda Civic COUPE Si; 2.0L; w/Rear Discs 2007 Honda Civic COUPE EX; 1.8L; w/Rear Discs 2007 Honda Accord SEDAN 6 Cyl; Except Hybrid 2007 Honda Accord SEDAN 4 Cyl. with Rear Discs 2007 Honda Accord HYBRID V6 Hybrid 2007 Honda Accord COUPE V6 Models With Manual Trans 2007 Honda Accord COUPE V6 Models With Automatic Trans 2007 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 2007 Acura TSX 2006 Honda S2000 2006 Honda CR-V LX 2006 Honda Civic SEDAN EX with rear disc 2006 Honda Civic COUPE Si Coupe 2006 Honda Civic COUPE EX with rear disc 2006 Honda Accord SEDAN 6 Cylinder; Except Hybrid 2006 Honda Accord SEDAN 4 Cylinder with Rear Disc 2006 Honda Accord HYBRID V6 Hybrid 2006 Honda Accord COUPE V6 Models With Manual Trans 2006 Honda Accord COUPE V6 Models With Automatic Trans 2006 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 2006 Acura TSX 2006 Acura RSX Type S 2006 Acura RSX Base Model 2005 Honda S2000 2005 Honda CR-V LX 2005 Honda Civic HATCHBACK 2005 Honda Accord SEDAN 6 Cylinder; Except Hybrid 2005 Honda Accord SEDAN 4 Cylinder with Rear Disc 2005 Honda Accord HYBRID V6 Hybrid 2005 Honda Accord COUPE V6 Models With Manual Trans 2005 Honda Accord COUPE V6 Models With Automatic Trans 2005 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 2005 Acura TSX 2005 Acura RSX Type S 2005 Acura RSX Base Model 2004 Honda S2000 2004 Honda CR-V LX w/Drum Style Parking Brake 2004 Honda Civic HATCHBACK 2004 Honda Accord SEDAN 6 cylinder 2004 Honda Accord SEDAN 4 Cylinder with Rear Disc 2004 Honda Accord COUPE V6 Models With Manual Trans 2004 Honda Accord COUPE V6 Models With Automatic Trans 2004 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 2004 Acura TSX 2004 Acura RSX Type S 2004 Acura RSX Base Model 2004 Acura RL 2003 Honda S2000 2003 Honda CR-V LX w/Drum Style Parking Brake 2003 Honda Civic HATCHBACK 2003 Honda Accord SEDAN 6 cylinder 2003 Honda Accord SEDAN 4 Cylinder with Rear Disc 2003 Honda Accord COUPE V6 Models With Manual Trans 2003 Honda Accord COUPE V6 Models With Automatic Trans 2003 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 2003 Acura RSX Type S 2003 Acura RSX Base Model 2003 Acura RL 2002 Honda S2000 2002 Honda CR-V LX w/Drum Style Parking Brake 2002 Honda Civic HATCHBACK 2002 Honda Accord SEDAN 6 Cyl. 2002 Honda Accord SEDAN 4 Cyl. with Rear Discs 2002 Honda Accord COUPE V6 Models 2002 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 2002 Acura RSX Type S 2002 Acura RSX Base Model 2002 Acura RL 2001 Honda S2000 2001 Honda Prelude SH 2001 Honda Prelude 2001 Honda Accord SEDAN 6 Cyl. 2001 Honda Accord SEDAN 4 Cyl. with Rear Discs 2001 Honda Accord COUPE V6 Models 2001 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 2001 Acura RL 2001 Acura Integra Type R 2001 Acura CL Type S 2001 Acura CL 2000 Honda S2000 2000 Honda Prelude SH 2000 Honda Prelude 2000 Honda Accord SEDAN 6 Cyl. 2000 Honda Accord SEDAN 4 Cyl. with Rear Discs 2000 Honda Accord COUPE V6 Models 2000 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 2000 Acura RL 2000 Acura Integra Type R 1999 Isuzu Oasis 1999 Honda Prelude SH 1999 Honda Prelude 1999 Honda Accord SEDAN 6 Cyl. 1999 Honda Accord SEDAN 4 Cyl. with Rear Discs 1999 Honda Accord COUPE V6 Models 1999 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 1999 Acura RL 1999 Acura CL 1998 Isuzu Oasis 1998 Honda Prelude SH 1998 Honda Prelude 1998 Honda Odyssey LX w/Drum Style Parking Brake 1998 Honda Odyssey EX w/Drum Style Parking Brake 1998 Honda Odyssey 1998 Honda Accord SEDAN 6 Cyl. 1998 Honda Accord SEDAN 4 Cyl. with Rear Discs 1998 Honda Accord COUPE V6 Models 1998 Honda Accord COUPE 4 Cylinder Models with Rear Disc brakes 1998 Acura TL 1998 Acura Integra Type R 1998 Acura CL 1997 Honda Prelude SH 1997 Honda Prelude 1997 Honda Odyssey LX w/Drum Style Parking Brake 1997 Honda Odyssey EX w/Drum Style Parking Brake 1997 Honda Odyssey 1997 Honda Accord WAGON 1997 Honda Accord WAGON 1997 Honda Accord SEDAN V6 1997 Honda Accord SEDAN 4 Cyl. 1997 Honda Accord COUPE EX, SE, or LX with Rear Disc brakes 1997 Acura TL 1997 Acura Integra Type R 1997 Acura CL 1996 Honda Prelude V-TEC 1996 Honda Prelude Si 1996 Honda Prelude S 1996 Honda Prelude except V-Tec 1996 Honda Odyssey LX w/Drum Style Parking Brake 1996 Honda Odyssey EX w/Drum Style Parking Brake 1996 Honda Odyssey 1996 Honda Accord WAGON 1996 Honda Accord WAGON 1996 Honda Accord SEDAN V6 1996 Honda Accord SEDAN 4 Cyl. 1996 Honda Accord COUPE EX, SE, or LX with Rear Disc brakes 1996 Acura TL 1995 Honda Prelude V-TEC 1995 Honda Prelude Si 1995 Honda Prelude S 1995 Honda Prelude except V-Tec 1995 Honda Odyssey LX w/Drum Style Parking Brake 1995 Honda Odyssey EX w/Drum Style Parking Brake 1995 Honda Odyssey 1995 Honda Accord WAGON 1995 Honda Accord WAGON 1995 Honda Accord SEDAN V6 1995 Honda Accord SEDAN 4 Cyl. 1995 Honda Accord COUPE EX, SE, or LX with Rear Disc brakes 1995 Acura TL 1994 Honda Prelude V-TEC 1994 Honda Prelude Si 1994 Honda Prelude S 1994 Honda Prelude except V-Tec 1994 Honda Accord WAGON 1994 Honda Accord WAGON 1994 Honda Accord SEDAN 1994 Honda Accord SEDAN 1994 Honda Accord COUPE EX, SE, or LX with Rear Disc brakes 1994 Acura Vigor LS 1994 Acura Vigor GS 1993 Honda Prelude V-TEC 1993 Honda Prelude Si 1993 Honda Prelude S 1993 Honda Prelude except V-Tec 1993 Honda Accord COUPE EX and SE 1993 Acura Vigor LS 1993 Acura Vigor GS 1992 Honda Prelude V-TEC 1992 Honda Prelude Si 1992 Honda Prelude S 1992 Honda Prelude except V-Tec 1992 Honda Accord COUPE EX 1992 Acura Vigor LS 1992 Acura Vigor GS 1991 Honda Accord Sedan 43022SM4G00 1990 Acura Legend LS 1990 Acura Legend L 1990 Acura Legend Coupe 1989 Acura Legend LS 1989 Acura Legend L 1989 Acura Legend Coupe 1988 Acura Legend LS 1988 Acura Legend L 1988 Acura Legend Coupe 43022SG0020 1988 Acura Legend Coupe 1987 Acura Legend LS 1987 Acura Legend L 1987 Acura Legend Coupe 43022SG0020 1987 Acura Legend Coupe [img-12185-left-large_default]

Carbotech Brakes Carbotech Wilwood Dynapro Caliper Brake Pads CTW7812 from $143.00

Carbotech Dynapro Caliper Brake Pads CTW7812 Fitting many Wilwood Dynapro caliper fitments, the Carbotech CTW7812 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT7812 Wilwood 12mm Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CTW7812 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP7812 Hawk cross reference: HB542_.490 Material thickness of pad of backing plate and pad material: .490" Material thickness of pad of backing plate and pad material: 12mm [img-12169-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT7812 Brake Pad Fitment: Billet Dynalite - Side Inlet Dynapro Dust-Boot Dynapro Lug Mount Dynapro Lug Mount Dynapro Lug Mount Dynapro Lug Mount Forged DPHA Narrow Dynapro Radial Mount Narrow Dynapro Radial Mount [img-12168-left-large_default]

Carbotech Brakes Carbotech CT1404 Brake Pads - Camaro (5th Gen) from $142.00

Carbotech CT1404 Brake Pads Carbotech CT1404 fits the front of the 2012-2015 Camaro V6 applications and is available in Carbotech 1521, AX6, XP8, XP10 and XP12 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT1404 Brake Pads Details: Manufacturer: Carbotech Manufacturer Part Number: CT1404 Material thickness of pad material and backing plate: .702" (18mm) FMSI Number: D1404 Hawk interchange: HB638_.702 CARBOTECH BRAKE COMPOUNDS Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT1404 Brake Pads Fitment: 2015 CHEVROLET Caprice 2015 CHEVROLET Camaro 2014 CHEVROLET Caprice 2014 CHEVROLET Camaro 2013 CHEVROLET Caprice 2013 CHEVROLET Camaro 2012 CHEVROLET Caprice 2012 CHEVROLET Camaro 2011 CHEVROLET Camaro 2010 CHEVROLET Camaro

Carbotech Brakes Carbotech CT412 C5 Corvette, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 from $142.00

Carbotech CT412 C5 Corvette, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 Carbotech CT412 fits the the Chevrolet Camaro, Corvette, Trans-Am, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT412 G-Loc equivalent: GLC412 Hawk Brake equivalent: HB111_.610 Thickness of backing plate and pad material: .610" Thickness of backing plate and pad material: 15mm Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT412 Fitment: 2004 Ford Mustang Mach 1 2004 Ford Mustang Cobra & SVT, MACH 1 2004 Ford Mustang Cobra 2003 Ford Mustang Mach 1 2003 Ford Mustang Cobra & SVT, MACH 1 2003 Ford Mustang Cobra 2002 Ford Mustang Cobra F5ZZ2001A 2001 Ford Mustang Cobra & Bullitt 2001 Ford Mustang Cobra 2001 Ford Mustang Bullitt 2000 Ford Mustang Cobra & Bullitt 1999 Ford Mustang Cobra & Bullitt 1999 Ford Mustang Cobra 1998 Ford Mustang Cobra 1997 Ford Mustang Cobra 1996 Ford Mustang Cobra 1996 Chevrolet Corvette 1995 Ford Mustang Cobra SVT 1995 Ford Mustang Cobra R 1995 Ford Mustang Cobra 1995 Chevrolet Corvette Heavy Duty Suspension 1995 Chevrolet Corvette except heavy duty suspension 1994 Ford Mustang Cobra 1994 Chevrolet Corvette Heavy Duty Suspension 1994 Chevrolet Corvette except heavy duty suspension 1993 Chevrolet Corvette Heavy Duty Suspension 1993 Chevrolet Corvette except heavy duty suspension 1992 Pontiac Firebird w/Performance Package 1992 Pontiac Firebird Trans Am GTA w/Performance Package 1992 Pontiac Firebird Performance Pkg. 1992 Pontiac Firebird Formula w/Performance Package 1992 Chevrolet Corvette Heavy Duty Suspension 1992 Chevrolet Corvette except heavy duty suspension 1992 Chevrolet Camaro Z28 w/Heavy Duty Brakes 1992 Chevrolet Camaro RS w/Heavy Duty Brakes 1992 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1991 Pontiac Firebird w/Performance Package 1991 Pontiac Firebird Trans Am GTA w/Performance Package 1991 Pontiac Firebird Performance Pkg. 1991 Pontiac Firebird Formula w/Performance Package 1991 Chevrolet Corvette Heavy Duty Suspension 1991 Chevrolet Corvette except heavy duty suspension 1991 Chevrolet Camaro Z28 w/Heavy Duty Brakes 1991 Chevrolet Camaro RS w/Heavy Duty Brakes 1991 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1990 Pontiac Firebird w/Performance Package 1990 Pontiac Firebird Trans Am GTA w/Performance Package 1990 Pontiac Firebird Performance Pkg. 1990 Pontiac Firebird Formula w/Performance Package 1990 Chevrolet Corvette Heavy Duty Suspension 1990 Chevrolet Corvette except heavy duty suspension 1990 Chevrolet Camaro RS w/Heavy Duty Brakes 1990 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1990 Chevrolet Camaro Iroc-Z w/Heavy Duty Brakes 1989 Pontiac Firebird w/Performance Package 1989 Pontiac Firebird Trans Am GTA w/Performance Package 1989 Pontiac Firebird Trans Am GTA SE w/Performance Package 1989 Pontiac Firebird Performance Pkg. 1989 Pontiac Firebird Formula w/Performance Package 1989 Chevrolet Corvette Heavy Duty Suspension 1989 Chevrolet Corvette except heavy duty suspension 1989 Chevrolet Camaro w/Heavy Duty Brakes 1989 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1988 Pontiac Firebird w/Performance Package 1988 Pontiac Firebird Performance Pkg. 1988 Chevrolet Corvette Heavy Duty Suspension 1988 Chevrolet Corvette except heavy duty suspension 1988 Chevrolet Camaro w/Heavy Duty Brakes 1988 Chevrolet Camaro Rear Disc - with Performance Pkg. 1987 Chevrolet Camaro Rear Disc - with Performance Pkg. 1986 Chevrolet Camaro Rear Disc - with Performance Pkg. 1985 Chevrolet Camaro Rear Disc - with Performance Pkg.

Carbotech Brakes Carbotech CT491L Lotus Elise (2005-11) Rear Brake Pad Set from $139.00

Carbotech CT491L Lotus Elise (2005-11) Rear Brake Pad Set Carbotech CT491L Brake Pads for the rear calipers on 2005-2011 Lotus Elise (Base) in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT491L Lotus Elise (2005-11) Rear Brake Pad Set Details: Manufacturer: Carbotech Manufacturer Part Number: CT491L Material thickness of pad material and backing plate: .465" Material thickness of pad material and backing plate: 12mm Hawk brake cross over: HB278_.560 G-Loc Brake cross over: GLC491 Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT491L fits the Rear of: 2005-2011 Lotus Elise Base

Carbotech Brakes Carbotech FRS-BRZ-GT86 w- Brembo Package Front Brake Pad Set CT929 from $139.00

Carbotech FRS/BRZ/GT86 w/ Brembo Package Front Brake Pad Set Carbotech brake pads for the front of Subaru BRZ, Scion FRS, or Toyota GT86 with the Brembo package. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT929 Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Carbotech Brakes Carbotech CT1337 Brake Pads - Camaro (5th Gen) from $138.00

Carbotech CT1337 Brake Pads Carbotech CT1337 fits the rear of many Camaro and Cadillac applications and is available in Carbotech 1521, AX6, XP8, XP10 and XP12 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT1337 Brake Pads Details: Manufacturer: Carbotech Manufacturer Part Number: CT1337 Material thickness of pad material and backing plate: .645" (16mm) FMSI Number: D1337 Hawk interchange: HB639_.645 CARBOTECH BRAKE COMPOUNDS Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT1337 Brake Pads Fitment: 2016 CADILLAC SRX Performance Brakes 2016 CADILLAC SRX 2015 CHEVROLET Camaro 2015 CADILLAC SRX Performance Brakes 2015 CADILLAC SRX 2014 CHEVROLET Camaro 2014 CADILLAC SRX Performance Brakes 2014 CADILLAC SRX 2014 CADILLAC CTS 2013 CHEVROLET Camaro 2013 CADILLAC SRX Performance Brakes 2013 CADILLAC SRX 2013 CADILLAC CTS 2012 CHEVROLET Camaro 2012 CADILLAC SRX Performance Brakes 2012 CADILLAC SRX 2012 CADILLAC CTS 2011 SAAB 9-4X 2011 CHEVROLET Camaro 2011 CADILLAC SRX Performance Brakes 2011 CADILLAC SRX 2011 CADILLAC CTS 2010 CHEVROLET Camaro 2010 CADILLAC SRX 2010 CADILLAC CTS 2009 CADILLAC CTS 2008 CADILLAC CTS

Carbotech Brakes Carbotech CT109L Lotus Elise (2005-11) Front Brake Pad Set from $137.00

Carbotech CT109L Lotus Elise (2005-11) Front Brake Pad Set Carbotech CT109L Brake Pads for the front calipers on 2005-2011 Lotus Elise (Base) in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT109L Lotus Elise (2005-11) Front Brake Pad Set Details: Manufacturer: Carbotech Manufacturer Part Number: CT109L Material thickness of pad material and backing plate: .560" Material thickness of pad material and backing plate: 14mm Hawk brake cross over: HB180_.560 G-Loc Brake cross over: GLC109 Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT109L fits the Front of: 2005-2011 Lotus Elise Base

Carbotech Brakes Carbotech CT1465 Brake Pads Mustang Rear 2005-2014 from $137.00

Carbotech Brake Pads Carbotech Race and Track Pads For the rear of 2005 - 2014 Ford Mustang. Measuring a full 17mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1465 Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1465 Hawk cross reference: HB485._656 Material thickness of pad of backing plate and pad material: .656" Material thickness of pad of backing plate and pad material: 17mm [img-12119-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1465 Brake Pad Fitment: 2005 FORD MUSTANG V6 - 4.0L (2005, 2005) 2005 FORD MUSTANG V8 4.6L (2005, 2005) 2005 FORD MUSTANG V6 (2005, 2005) 2006 FORD MUSTANG V6 - 4.0L (2006, 2006) 2006 FORD MUSTANG V8 4.6L (2006, 2006) 2006 FORD MUSTANG V6 (2006, 2006) 2007 FORD MUSTANG SHELBY GT (2007, 2007) 2007 FORD MUSTANG SHELBY GT500 (2007, 2007) 2007 FORD MUSTANG V6 - 4.0L (2007, 2007) 2007 FORD MUSTANG V8 4.6L (2007, 2007) 2007 FORD MUSTANG SHELBY GT500 5.4L (2007, 2007) 2007 FORD MUSTANG V6 (2007, 2007) 2008 FORD MUSTANG SHELBY GT (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 (2008, 2008) 2008 FORD MUSTANG V6 (2008, 2008) 2008 FORD MUSTANG V8; GT (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 5.4L (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 ALL (2008, 2008) 2008 FORD MUSTANG V6 (2008, 2008) 2009 FORD MUSTANG SHELBY (2009, 2009) 2009 FORD MUSTANG V6 (2009, 2009) 2009 FORD MUSTANG V8; GT (2009, 2009) 2009 FORD MUSTANG SHELBY GT500 5.4L (2009, 2009) 2009 FORD MUSTANG SHELBY GT500 ALL (2009, 2009) 2009 FORD MUSTANG V6 (2009, 2009) 2010 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG SHELBY (2010, 2010) 2010 FORD MUSTANG V6 MFG AFTER 3/21/2010 - EXCEPT MODELS WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG V6 MFG UP TO 3/20/2010 (2010, 2010) 2010 FORD MUSTANG V8; GT MFG AFTER 3/21/2010 - EXCEPT MODELS WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG V8; GT MFG UP TO 3/20/2010 (2010, 2010) 2010 FORD MUSTANG SHELBY GT500 ALL (2010, 2010) 2010 FORD MUSTANG V6 (2010, 2010) 2011 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG SHELBY (2011, 2011) 2011 FORD MUSTANG V6 MODELS WITHOUT BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG V8; GT MODELS WITHOUT BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2011, 2011) 2011 FORD MUSTANG SHELBY GT500 ALL (2011, 2011) 2011 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2011, 2011) 2012 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG V6 MODELS WITHOUT BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG V8; GT MODELS WITHOUT BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2012, 2012) 2012 FORD MUSTANG BOSS 302 5.0L (2012, 2012) 2012 FORD MUSTANG GT BREMBO ALL (2012, 2012) 2012 FORD MUSTANG GT STANDARD BRAKES 5.0L (2012, 2012) 2012 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2012, 2012) 2013 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2013, 2013) 2013 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 316MM (12.45") FRONT ROTORS (2013, 2013) 2013 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 336MM (13.23") FRONT ROTORS (2013, 2013) 2013 FORD MUSTANG SHELBY GT500 (2013, 2013) 2013 FORD MUSTANG BOSS 302 5.0L (2013, 2013) 2013 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2013, 2013) 2013 FORD MUSTANG GT STANDARD BRAKES 5.0L (2013, 2013) 2013 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2013, 2013) 2014 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2014, 2014) 2014 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 316MM (12.45") FRONT ROTORS (2014, 2014) 2014 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 336MM (13.23") FRONT ROTORS (2014, 2014) 2014 FORD MUSTANG SHELBY GT500 (2014, 2014) 2014 FORD MUSTANG GT BREMBO TRACK ALL (2014, 2014) 2014 FORD MUSTANG GT BREMBO W/AUTO TRANS ALL (2014, 2014) 2014 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2014, 2014) 2014 FORD MUSTANG GT STANDARD BRAKES 5.0L (2014, 2014) 2014 FORD MUSTANG SHELBY GT500 ALL (2014, 2014) 2014 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2014, 2014) [img-12119-left-large_default]

Carbotech Brakes Carbotech VW Front Brake Pads CTB-CT696 from $137.00

Carbotech Brake Pads Volkswagon Front Carbotech Pads - Part Number CT696 - are used on many VW front axles, such as 1996-98 Golf GTi and GLS Turbo, GLX (VR6) & 1.8L Turbo How To Properly Bed In Carbotech Racing Brake Pads Manufacturer : Carbotech Manufacturer Part Number: CT696 Fitment: 1996-1998 Front Axle VW GTi, Includes - GLS Turbo, GLX & 1.8L Turbo Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Carbotech Brakes GiroDisc Magic Street Pads 014-17 C7 Stingray & 2015-2017 Z06 Rear Brake Pad Set $135.00

GiroDisc Magic Pad Girodisc's "Magic Pads" offer a solution to common issues with factory brake pads such as squeaking, excessive dust, and high costs. These pads produce less dust compared to typical factory and performance pads, reducing the need for frequent wheel cleaning. Moreover, they provide excellent initial bite, a feature often lacking in more affordable pads. However, what truly sets our pads apart is their ability to effectively address brake noise problems, earning them the reputation of being a "silver bullet" solution. Crafted from a semi-metallic composition, Magic Pads are gentle on both rotors and your budget. When transitioning between different pad compounds, we recommend replacing all pads in the car simultaneously. Each set of Magic Pads includes pre-installed anti-noise shields at no extra cost. Should you have any inquiries, feel free to reach out to us – we're here to assist you! The Magic Street Pad 1718 is a popular pad used on many Corvette Models: 2014 CHEVROLET CORVETTE STING RAY WITH STANDARD JL9 BRAKE PACKAGE (2014) 2014 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - OE DESIGNED CO-CAST BRAKE ROTORS (2014) 2014 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - RE-DESIGNED FULL CAST BRAKE ROTORS FOR IMPROVED COOLING (2014) 2015 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - OE DESIGNED CO-CAST BRAKE ROTORS (2015) 2015 CHEVROLET CORVETTE STING RAY Z51 - J55 BRAKE PACKAGE - RE-DESIGNED FULL CAST BRAKE ROTORS FOR IMPROVED COOLING (2015) 2015 CHEVROLET CORVETTE HEAVY DUTY (2015) 2015 CHEVROLET CORVETTE NO SUBMODEL (2015) 2015 CHEVROLET CORVETTE Z06 (2015) 2016 CHEVROLET CORVETTE NO SUBMODEL (2016) 2016 CHEVROLET CORVETTE Z06 (2016) 2017 CHEVROLET CORVETTE NO SUBMODEL (2017) 2017 CHEVROLET CORVETTE Z06 (2017)

Carbotech Brakes Carbotech CT31 Brake Pads - Stoptech STR-21 from $134.00

Carbotech CT31 Brake Pads - Stoptech STR-21 Carbotech Brake Pads for Stoptech STR-21 calipers. Carbotech CT31 Brake Pads are offered in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT31 Brake Pads - Stoptech STR-21 Details: Manufacturer: Carbotech Manufacturer Part Number: CT31 G-Loc cross reference: GP31 Hawk cross reference: HB172._500 Material thickness of pad of backing plate and pad material: .500" Material thickness of pad of backing plate and pad material: 13mm Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT31 Brake Pads - Stoptech STR-21 Fitment: Stoptech STR-21 calipers

Carbotech Brakes Carbotech CT961 Brake Pads from $134.00

Carbotech CT961 Brake Pads Fitting the Stoptech ST-22 calipers and calipers used on many Nissan & Subaru rear axle positions, the Carbotech CT961 is available in Carbotech 1521, AX6, XP8, XP10, XP12 and XP20 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT961 Brake Pads Ford & Mazda Front Details: Manufacturer: Carbotech Manufacturer Part Number: CT961 Available compounds: 1521, AX6, XP6, XP8, XP10, XP12 Most popular track combination: XP10 Front, XP8 Rear Hawk cross reference: HB180._560 Material thickness of pad of backing plate and pad material: .560" Material thickness of pad of backing plate and pad material: 14mm CARBOTECH BRAKE COMPOUNDS Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT961 Brake Pads Fitment: 2002 MITSUBISHI LANCER EVOLUTION (2002) 2003 INFINITI G35 BREMBO BRAKES (2003) 2003 MITSUBISHI LANCER EVOLUTION (2003) 2003 MITSUBISHI LANCER MR485499 (2003) 2003 MITSUBISHI LANCER EVOLUTION ALL (2003) 2003 NISSAN 350Z WITH BREMBO BRAKES (2003) 2003 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2003 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2003 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2003 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2004 INFINITI G35 RWD - BREMBO BRAKES (2004) 2004 MITSUBISHI LANCER EVOLUTION (2004) 2004 MITSUBISHI LANCER MR485499 (2004) 2004 MITSUBISHI LANCER EVOLUTION ALL (2004) 2004 NISSAN 350Z WITH BREMBO BRAKES (2004) 2004 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 SUBARU IMPREZA WRX STI (2004) 2004 SUBARU IMPREZA WRX STI ALL (2004) 2005 MITSUBISHI LANCER EVOLUTION (2005) 2005 MITSUBISHI LANCER MR449086 (2005) 2005 MITSUBISHI LANCER EVOLUTION ALL (2005) 2005 MITSUBISHI LANCER EVOLUTION MR ALL (2005) 2005 MITSUBISHI LANCER EVOLUTION RS ALL (2005) 2005 NISSAN 350Z WITH BREMBO BRAKES (2005) 2005 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 SUBARU IMPREZA WRX STI (2005) 2006 MITSUBISHI LANCER EVOLUTION (2006) 2006 MITSUBISHI LANCER MR485499 (2006) 2006 MITSUBISHI LANCER EVOLUTION ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION MR ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION RS ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION SE ALL (2006) 2006 NISSAN 350Z WITH BREMBO BRAKES (2006) 2006 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 SUBARU IMPREZA WRX STI (2006) 2007 MITSUBISHI LANCER MR485499 (2007) 2007 NISSAN 350Z WITH BREMBO BRAKES (2007) 2007 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 SUBARU IMPREZA WRX STI (2007) 2007 SUBARU IMPREZA WRZ STI LIMITED ALL (2007) 2008 NISSAN 350Z WITH BREMBO BRAKES (2008) 2008 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 SUBARU IMPREZA WRX STI (2008) 2008 SUBARU IMPREZA WRX STI ALL (2008) 2009 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 NISSAN 350Z GRAND TOURING D4060CD01B (2009) 2009 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 SUBARU IMPREZA WRX STI (2009) 2009 SUBARU IMPREZA WRX STI ALL (2009) 2010 SUBARU IMPREZA WRX STI (2010) 2010 SUBARU IMPREZA WRX STI ALL (2010) 2011 SUBARU IMPREZA WRX STI (2011) 2011 SUBARU IMPREZA WRX STI ALL (2011) 2012 SUBARU IMPREZA WRX STI (2012) 2012 SUBARU IMPREZA WRX STI ALL (2012) 2013 SUBARU IMPREZA WRX STI (2013) 2013 SUBARU IMPREZA WRX STI ALL (2013) 2014 SUBARU IMPREZA WRX STI (2014) 2014 SUBARU IMPREZA WRX STI ALL (2014) 2015 SUBARU WRX STI 26696FG000 (2015)

Carbotech Brakes Carbotech 1999-2001 Subaru Impreza Front Pads (NON-RS) from $130.00

Carbotech Brake Pads How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT722 Fits: 1999-2001 Subaru Impreza Does NOT Fit: Subaru Impreza with RS package Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Carbotech Brakes Carbotech CT1124 FRS-BRZ-GT86 Rear Brake Pad Set from $129.00

Carbotech CT1124 FRS/BRZ/GT86 Rear Brake Pad Set Carbotech brake pads for Subaru BRZ, Scion FRS, or Toyota GT86 Rear. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. This if the pad if all 2013 and 2014 BRZ, FRS or GT86 rear axles, but for the 2015 fit the vented rear disks (292mm) only If you have a 2013-2014 BRZ, FRS, GT86, this your rear pad. If you have a 2015 BRZ, FRS, GT86 with a vented rear rotor (292mm), this your rear pad. If you have a 2015 BRZ, FRS, GT86 with a solid rear rotor (277mm), then you use CTB-1114 How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1124 Fits 2013-2014 all rear rotors: Yes Fits 2015 vented rear rotors: Yes Fits 2015 solid rear rotors: No, use CTB-1114 Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

15 16 17 18

Find anything you need

Brakes By Vehicle

Premium racing brake pads, rotors, fluids, and full racing brake kits from top manufacturers. Racing brakes ensure you have consistent and repeatable braking performance from green flag to checker.