Racing Restraints & Nets

The Formula 2x2: Your Go-To Belt for Formula Type Cars The Formula 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" non-adjustable Formula lap belts, and individual non-adjustable sub straps. Individual Sub Straps Make the Formula 2x2 Different The sub straps loop through the lap belts and latch into the shoulder belts. The classic “D” ring used in previous Formula belts has been replaced with sewn-in webbing, creating a more lightweight and comfortable fit. The sub straps are typically anchored very far rearward, almost to the lap belt mounting points. See Schroth Harness Installation documents for more details. This racing harness is typically used in single-seat open-wheeled cars with very reclined seating positions. It's not recommended for use in traditional road-racing sports cars or vehicles with more upright seating positions. Comes with wrapped snap-in attachments at all six points. Bolt-in attachments can be purchased separately. The Formula 2x2 is available in Black or Red. FEATURES: FHR/HANS specific 2” shoulder belts 2” Formula non-adjustable lap belts Individual non-adjustable sub straps Rotary cam lock FIA 8853-2016 approved

Schroth Profi II ASM 4 Point Harness (Anti-Sub) The Schroth Profi II ASM 4 Point Harness (Anti-Sub) integrates Schroth unique ASM (Anti-SubMarining) technology in a four-point system. The ideal harness for stock seats, or seats not designed for a pass-through for a sub strap, that are used in Driver Education programs. Schroth ASM is an extra fold of material sewn into the inboard shoulder belt, elongating at a separate rate compared to the outboard belt. This allows two movements: the upper torso can twist slightly, and on the rebound phase, the torso is planted firmly back in the seat instead of sliding under the lap belt. The Schroth Profi II ASM 4 Point Harness is good for use with a HANS device or other Head and Neck Restraint (HNR). The ASM shoulder strap on the ASM is 3 width, which will work with any HNR. A dual or single strap can be added to convert this belt into a 5- or 6- point system. The shoulders are ready to wrap around a roll bar, and snap-in or bolt-in attachments can be purchased. The Schroth Profi II ASM 4 Point Harness also features a Flex Belt. Instead of being sewn into the harness, the cam latches and end fittings are wrapped, making configuration changes from a Pull-Up to a Pull-Down configuration quick and easy. In addition to helping you customize the use of your device for your particular situation, you can add bolt-in brackets to be wrapped in the lap belts. Snap-in brackets are standard on the lap belts. Choose from Black, Blue, or Red! Be sure to specify Driver or Passenger side as the construction is slightly different for each.

Sabelt Enduro Silver Series Porsche GT2/GT3/GT4 Racing Harness 2029 Expiry Built specifically for the Porsche GT2, GT3, and GT4, this six-point Sabelt Enduro Silver Series racing harness provides all the safety and security you've come to expect from Sabelt in a package that makes installation in your Porsche extremely fast and easy. The Sabelt Silver Series harness is easily adjusted using bright yellow tabs that pull down, making securing and releasing your harness simpler than ever. NEW FULLY INTEGRATED CAM LOCK The newly designed cam lock buckle now integrates the sub belts into the fixture, greatly increasing driver safety in the event of an impact. A number of other handy features have been added, including Velcro communication/hydration routing on top of shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track. Sabelt is an industry-leading manufacturer of motorsport harnesses and safety accessories, and their Silver Series Enduro Porsche racing harnesses stand out for good reason. SABELT SILVER SERIES ENDURO PORSCHE RACING HARNESS DETAILS Manufacturer: Sabelt Manufacturer part no.: CFCIxxx00024 FIA 8853-2016 homologation Available in black, blue, or red webbing New camlock buckle fully integrated with the sub belts Bright yellow pull-down straps for easy adjustment Velcro on shoulder straps secures loose ends Communication/hydration routing on shoulder belts

OMP ONE Versa 6 Point 2-Inch Racing Harness The super-lightweight two-inch OMP ONE Versa 6 point camlock racing harness is designed specifically for sedan drivers using a HANS device. Special lightweight adjusters and compact lap belt mounting hardware are used to keep weight to a minimum. Even the buckle tabs have been lightened. Th OMP ONE Versa is ideal for endurance racing. HARNESS INNOVATIONS MAKE IT EASY, COMFORTABLE, AND VERSATILE Shoulder Belts: 2" wide along their entire length for better alignment with a HANS device. Each shoulder strap has loops just above the adjusters for securing radio cables, drink tubes, or rubber bands. They include three-bar sliders for easy wrap-around mounting. Lap Belts: 2" wide, one set with pull-up adjusters and one set with pull-down adjusters are included. They have lightweight carabiners sewn in for use with the included eyebolts. Hook-and-loop fasteners on the lap and shoulder belts can also be used to keep the belts out of the way during driver changes. Sub Belts: 2" wide with pull-up adjusters for quick driver changes. The rotary camlock buckle is permanently attached to the sub belts by a rounded T-bar. No more sitting on the buckle when you get in the car! A special detent prevents accidental buckle release. The sub belts have snap-in fittings with three-bar sliders for easy conversion to wrap-around mounting. Includes four forged eye bolts with 7/16" x 20 UNF threads. Available in Black or Red

Schroth QuickFit Pro 4 Point Harness For the first time, a four-point harness has been designed for use with a HANS device with stock seats! Perfect for HPDE, track day, and driving school cars, the Schroth QuickFit Pro 4 Point Harness provides a safer, more authentic race driving experience by allowing the use of a HANS device. With this harness, you don't have to spend thousands of dollars on a roll bar, new seats, and six-point harnesses to run safely on the track! Coupled with your vehicle’s existing safety systems, the Schroth QuickFit Pro 4 Point Harness is designed to maximize effectiveness of your HANS device. Traditional four-point harnesses are sewn to lap belts, and don’t join at the center cam lock. This creates a six- to eight-inch gap. The Schroth QuickFit Pro 4 Point Harness answers this problem by allowing each shoulder belt to angle towards the cam lock, integrating with the HANS device. The Schroth QuickFit Pro 4 Point Harness works in conjunction with your car’s seat belt pre-tensioner and airbag for additional peace of mind. The Quick Fit Pro clicks into the car’s female seat belt receptacle, notifying the car’s airbag computer that the seat is in use and the driver is restrained. The pre-tensioner is also activated. This device ignites a pyrotechnic charge if an accident happens, tightening the lap belt and holding your driver in snugly. The Schroth QuickFit Pro 4 Point Harness is meant to be used with your car's factory-fitted, stock seats that have passed a seat-back strength test.

Schroth Clubman 2x2 6 Point Racing Harness Schroth's Clubman has one aim: to provide a superior harness for people needing a lower-cost belt. The Clubman features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" Clubman pull up lap belts, and a T-bar non adjustable sub strap. Shoulders and sub strap hardware is wrapped in. The FHR specific shoulder belts are designed to make FHR use safer and more comfortable. The full 2" shoulder webbing fits perfecting on a FHR device, creating optimal force distribution on the surface of the device. ADJUSTERS AND OPTIONS The adjusters on the Clubman belt are heavier and not as easy to use. They are, however, cheaper and bring down the overall cost of the harness. In addition the sub strap does not have adjusters and the lap hardware is not interchangeable. Only available with snap-in, pull-up lap belts. Laps are not reversible like they are on the Flexi 2x2. FEATURES: 2” shoulder belts 2” Profi pull-up lap belts with sewn-in snap-in hardware T-bar sub non-adjustable strap Rotary cam lock

Sabelt Steel Saloon 4-Point Harness LOCK IN. PUSH HARDER. DRIVE WITH CONFIDENCE. You and your car are in perfect sync—the engine roars, the tires grip, and every corner becomes an opportunity to prove your skill. But when you’re pushing the limits on track day, safety isn’t optional. Enter the Sabelt Steel 4-Point Saloon Harness—your ultimate race-ready security system that keeps you locked in place, focused, and in full control. No more sliding around in your seat or bracing yourself against G-forces with your knee. This FIA 8854/98-approved harness features 3-inch-wide shoulder and lap straps that distribute force evenly, providing unparalleled support during high-speed cornering, heavy braking, and full-throttle acceleration. The pull-up lap strap adjustment ensures a perfect fit, while the snap hook fixings with removable shoulder strap options make it adaptable to your setup. And installation? A breeze. The included eye bolts keep everything locked down securely so you can focus on driving, not fidgeting with your harness. WHY YOU NEED THIS HARNESS ✅ Race-Proven Security – FIA 8854/98-approved for track use, meaning no compromises on safety✅ Unmatched Stability – Keeps you firmly in place, letting you focus on hitting every apex✅ Effortless Adjustments – Pull-up lap straps allow for quick, on-the-fly fine-tuning✅ Versatile Installation – Snap hook fixings with removable shoulder strap options for flexibility✅ Durable & Track-Ready – Engineered with high-strength materials to withstand serious driving forces SPECIFICATIONS Harness Type: 4-Point Strap Width: 3 inches (shoulder & lap) Adjustment Type: Pull-up lap strap for quick fine-tuning Fixings: Snap hook fixings with removable shoulder strap options Mounting Hardware: Includes eye bolts for secure attachment Certification: FIA 8854/98 approved FAQ: Q: Is this harness FIA-approved for racing?A: Absolutely! It meets FIA 8854/98 standards, making it fully compliant for competitive racing and track use. Q: Can I install this in my daily driver?A: While you technically can, this harness is designed for track-focused setups and not ideal for everyday street use. Q: Will it fit my seat setup?A: The snap hook fixings and removable shoulder straps offer great installation flexibility, making it compatible with most saloon-style race seats. Q: How do I adjust the harness for the best fit?A: The pull-up lap straps allow you to fine-tune the fit while seated, ensuring you’re locked in comfortably before you launch down the straightaway. THE MOMENT OF TRUTH: ARE YOU READY? Your car is built for performance—shouldn’t your safety gear match that level of precision? The Sabelt Steel 4-Point Saloon Harness ensures that every lap is as safe as it is exhilarating. Whether you’re chasing lap records or dialing in your racecraft, this harness is the upgrade you can’t afford to skip. Click "Add to Cart" now and experience total control on track!

Sabelt Porsche 996 / 997 4-Point Track Day Car Harness Lock In. Grip Tight. Unleash Performance. Your Porsche isn’t just a car—it’s an extension of your soul, a finely tuned beast that demands respect on the track. But let’s be real: power without control is just chaos waiting to happen. That’s where the Sabelt 4-Point Racing Harness comes in. It’s more than just a safety upgrade—it’s your ticket to a secure, controlled, and confidence-inspiring drive every time you hit the throttle. Strap in and feel the difference. The full 2-inch webbing hugs your body like a second skin, while the Formula B3 buckle locks you in with race-ready precision. Those yellow pull-down straps? They make adjustments a breeze, so you can dial in your perfect fit without missing a beat. And when it’s time to exit? The superlight quick-release adjusters ensure you’re out in a flash. And let’s talk style. This harness isn’t just track-day tough—it’s Porsche-perfect, rocking a sleek silver design with bold blue lap mounts that scream performance. Why You’ll Love It: Total Confidence – Secure yourself in place so you can focus on the apex, not bracing against G-forcesRace-Ready Adjustments – Fine-tune your fit effortlessly with the quick-adjust pull-down strapsBuilt for Performance – Premium P-Type steel fixing plates keep everything locked down tightPorsche-Specific Fit – Designed with your Porsche’s interior in mind—no guesswork, just a flawless installationTrack-Proven Durability – Sabelt’s racing pedigree ensures this harness stands up to serious driving conditions Specifications: Harness Type: 4-Point Webbing Width: Full 2-inch for superior support Buckle Type: Formula B3 racing buckle for ultimate security Adjustment: Yellow pull-down straps for easy fine-tuning Quick Release: Superlight quick-release adjusters for fast exits Mounting Plates: P-Type steel fixing plates for rock-solid installation Color Options: Red, Black and Blue Compatibility: Specifically engineered for Porsche models FAQs Q: Will this fit my Porsche without modifications?A: Absolutely! This harness is Porsche-specific, meaning it’s designed to fit without drilling or awkward mounting solutions. Just install and go! Q: Is this harness FIA or SFI certified?A: This harness is designed for track days and high-performance driving but is not FIA or SFI homologated. For sanctioned racing events, check your rulebook for compliance requirements. Q: Can I install this in a daily driver?A: You can, but keep in mind that 4-point harnesses are best suited for track use. They offer incredible support but may not be as convenient for everyday commuting. Q: How do I adjust the fit?A: The yellow pull-down straps make it super easy to fine-tune your fit even while seated—no struggling, no fuss. Ready to Take Your Driving Experience to the Next Level? Don’t settle for subpar safety. Whether you’re carving corners at the track or pushing limits on a spirited drive, the Sabelt 4-Point Racing Harness keeps you locked in, focused, and in total control. Get yours today and experience next-level confidence behind the wheel. ➡ Click the Buy Button Now—Your Porsche Deserves It!

Sabelt Porsche GT3/GT4 4 Point Harness Built specifically for the Porsche GT2, GT3, and GT4, these four-point racing harnesses provide all the safety and security you've come to expect from Sabelt in a package that makes adding safety to your Porsche extremely fast and easy. The harness is easily adjusted using the bright yellow tabs that pull down, making securing and releasing your harness simpler than ever. A number of other handy features have been added, including communication/hydration routing on top of shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track.Sabelt is an industry leading manufacturer of motorsport harnesses and accessories, for good reason. SABELT PORSCHE GT2/GT3/GT4 RACING HARNESS FEATURES NOT FIA or SFI CERTIFIED Easily adjusted using the yellow pull-down straps. Velcro patches on shoulder straps for securing loose ends. Communication/hydration routing on shoulder belts keep lines secure and out of the way.

Sabelt Sewn-In Arm Restraints Add-on to Sabelt fire suits. Not for individual sale.

Schroth Profi II ASM 4 Point Harness (Anti-Sub) 2028 Expiry The Schroth Profi II ASM 4 Point Harness (Anti-Sub) integrates Schroth’s unique ASM (Anti-SubMarining) technology in a four-point system. The ideal harness for stock seats, or seats not designed for a pass-through for a sub strap, that are used in Driver Education programs. Schroth’s ASM is an extra fold of material sewn into the inboard shoulder belt, elongating at a separate rate compared to the outboard belt. This allows two movements: the upper torso can twist slightly, and on the rebound phase, the torso is planted firmly back in the seat instead of sliding under the lap belt. The Schroth Profi II ASM 4 Point Harness is good for use with a HANS device or other Head and Neck Restraint (HNR). The ASM shoulder strap on the ASM is 3” width, which will work with any HNR. A dual or single strap can be added to convert this belt into a 5- or 6- point system. The shoulders are ready to wrap around a roll bar, and snap-in or bolt-in attachments can be purchased. The Schroth Profi II ASM 4 Point Harness also features a “Flex Belt.” Instead of being sewn into the harness, the cam latches and end fittings are wrapped, making configuration changes from a Pull-Up to a Pull-Down configuration quick and easy. In addition to helping you customize the use of your device for your particular situation, you can add bolt-in brackets to be wrapped in the lap belts. Snap-in brackets are standard on the lap belts. Choose from Black, Blue, or Red! Be sure to specify Driver or Passenger side as the construction is slightly different for each. See Schroth Harness Installation Checklist Here

Sparco Six-Point Martini Racing Harness 2" HANS SHOULDER BELTS W/ ALUMINUM ADJUSTERS Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Each strap attaches in the center using an aircraft-quality quick-release aluminum buckle with integrated anti-submarine belts. The lightweight aluminum adjusters allow for smooth, quick adjustments and perfect clamping. All belts attach to your car or seat mounts using clip-in fixtures. This harness is FIA approved. SPARCO MARTINI RACE HARNESS TECHNOLOGY Pull-up lap belts Lightweight aluminum adjusters for smooth and quick tensioning FIA Approved Available in black, blue, or red.

Safecraft Restraint Systems Quick Release Kevlar Head Net  *Picture shown with optional strap adapter.  The Safecraft Restraint Systems Quick-Release Kevlar Head Net adds driver security to your roll cage, preventing ejection in the event of a crash and helping keep the driver's head from impacting the roll cage (depending on orientation to the driver). The push-button quick release gets the net out of the way immediately for emergency egress or driver changes. Safecraft is a premium brand of racing safety equipment, run by racers with products designed and handcrafted in the USA by skilled craftsman. Some sanctioning organizations require a window net system for competition. SAFECRAFT QUICK RELEASE HEAD NET FEATURES Choose SFI 37.1 or FIA 8863/2013 certification Kevlar webbing Choose Left or Right side Measures: 15" tall (tallest vertical strap) by 26" long (tip to back of web), three 29" attachment straps Includes net and quick-release hardware Standard netting color is black

Sparco 6-Point Racing Harness 2" HANS-COMPATIBLE SHOULDER BELTS W/ STEEL ADJUSTERS Sparco’s full line of harnesses works in unity with Sparco's competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. This six-point HANS-compatible harness features two-inch lap and shoulder belts.  This design allows for easy use with a HANS or other head and neck restraint device. Each strap attaches in the center using aircraft-quality quick-release buckles, with integrated anti-submarine belts. The steel adjusters allow for smooth, quick adjustments and perfect clamping. Shoulder and sub belts attach to your car or seat mounts using snap-on fittings, with carabiner fasteners for lap belts. SPARCO 6 POINT RACING HARNESS DETAILS 2" lap and shoulder belts Lightweight carabiner fasteners for lap belts Pull-Up lap belts Light-weight steel adjuster for smooth and quick tensioning Snap-in mounting kit included FIA 8853-2016 approved Available in Black, Blue, or Red.