AiM Racing Data

AiM Data Hub Connects SmartyCam 2.0 & Older to GPS09C Connect the latest AiM GPS09C GPS module to a stand-alone SmartyCam HD or GP-HD (prior to version 2.1) with this special AiM powered data hub. AiM DATA HUB OLDER SMARTYCAM TO GPS09C DETAILS Manufacturer: AiM Sports Manufacturer part no: X08HB2GK3 Wiring leads 1: Red (12VDC) Wiring lead 2: Black (ground) Port 1: Female Binder 712 5-pin Port 2: Female Binder 712 5-Pin ADD GPS TO YOUR OLDER SMARTYCAM The AiM SmartyCam HD and SmartyCam GP-HD (prior to version 2.1) were designed to work with dedicated SmartyCam GPS modules, especially when the camera was used as a stand-alone unit. This older GPS module is no longer available, so the AiM Data Hub allows users needing a GPS module to plug the latest AiM GPS09C directly into their older SmartyCam. This SmartyCam/GPS09C Data Hub hosts both the GPS09C module and the SmartyCam CAN cable via its two Binder 712 5-pin ports. The Data Hub also provides an external 12VDC cable to be connected to a vehicle electrical system. As a modified version, this SmartyCam/GPS Data Hub will not connect to an existing AiM data-logger.

AiM Magnetic Wheel Speed Sensor - 719 Lead This sensor has the 719 (four-pin plastic push-on type) connector to connect to the MyChron3 Plus or Gold Auto dashes, any AiM MXL series dash, or any EVO3 series data logger. The MyChron3 XG-Log requires a 712-719 Patch Cable (Part No. MC-210). The EVO4 requires either the MC-210 patch cable or the Y-Cable for Dual Speed Sensors (Part No. MC-264). The front of the sensor has M8 threads for easy mounting in a bracket you supply. We also offer Replacement Speed Sensor Magnets for installation on a spare wheel, or for adding multiple trigger points. Tip: Add a longer 719-719 Extension Cable (Part No. MC-211, sold separately) and install your wheel speed sensor with the plug near the suspension pick-up point. In the event of crash damage, the sensor will be much easier to replace without fishing a new lead through the car.

AiM SmartyCam GP HD Suction Mount This adjustable mount holds your AiM SmartyCam GP HD Rev 2.2 securely to your windshield, allowing you to quickly mount your camera and keep it pointed in the right direction during races, track days, and other driving events. Two pivoting ball joints allow a wide range of adjustment, and the 3 1/2" diameter lever-actuated suction cup base works on any smooth, clean, flat surface. The machined aluminum collar accepts a lipstick-type camera measuring 24mm (0.94") OD. You can also eliminate the collar to mount a lightweight, compact camera with a standard 1/4-20 tripod mount (including SmartyCam and SmartyCam HD). KIT INCLUDES: Suction cup base Lower ball clamp 60mm clamp arm Top ball with 1/4-20 mounting stud Machined collar

AiM SmartyCam HD Suction Mount This adjustable mount holds your AiM SmartyCam HD Rev 2.1 securely to your windshield or any other smooth, flat surface. Allows you to quickly mount your camera and keeping it pointed in the right direction during track days and other racing events. Two pivoting ball joints allow a wide range of adjustment and the 3 1/2" diameter, lever-actuated suction cup base mounts incredibly securely. KIT INCLUDES: Suction cup Clamp base with ball (screws provided) 60mm single clamp arm Ball head with 1/4-20 threaded stud Ridged washer

AiM OBD-2 to MXL2, MXS & MXG Dash Cable Special AiM cable for connecting an AiM dash like the AiM MXS, MXG, MXL Pro, and Evo 4. This is a special cable that takes your OBD-2 (K-Line) car connector and connects to the next generation AiM dashes via the Deutsch DTM Connector.If your harness does not have this gray Deutsch DTM connector, we can have your harness modified. You will need to send us your harness for this custom work (for a fee) with a 7-10 day turn around time. AiM OBD-2 to MXL2, MXS & MXG Dash Cable Details:Manufacturer: AiMManufacturer part number: OBDIIManufacturer alternate part number: MC-285Fits OBD-2 to AiM MXSFits OBD-2 to AiM MXGFits OBD-2 to AiM MXL2Fits OBD-2 to AiM Evo 4

AiM Cable for Reverse or Side Mirror Cameras The AIM V02573410 Y-cable is intended specifically to connect two AiM Analog Rear Cameras to your AiM "1.2" version MX-Series dash MXS 1.2/1.3, MXP, or MXG 1.2/1.3 including Strada versions. AiM Cable for Reverse or Side Mirror Cameras Details: Manufacturer: AiM Manufacturer part number: V02566300 This long cable features two length different leads from your dash, one measuring 6 meters (19 feet 8 inches) from the dash and the other camera 4 meters (13 feet). The most common applications are using one camera as a backup camera and another as a rearview mirror or front-facing curb view camera, or for both side mirrors.

AiM 2-Port CAN Powered Data Hub for AiM MXS, MXM, MXG, MXL, EVO3, EVO4 Do you have an AiM Dash like the MXS, MSM, MXG, Pista or MXL and want to run multiple devices like SmartyCam HD's or other power usage items? Then the AIM 2 port powered CAN Data Hub is for you. If you use an ECU bridge or are powering your SmartyCam(s) from your 5 pin cable (using ECU Power), you now can have a more stable power supply to run your cameras for an extended duration. Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (Thermocouple) Hubs. Any channel can be selected for display on the dash. 15" cable. This allows you to add multiple SmartyCams to you AiM system. AiM 2-Port Powered CAN Data Hub for AiM MXG, MXS, & Pista Details: Manufacturer: AiM Manufacturer Part Number: X08HB2GK0

The original AiM SmartyCam (2009-2013) and new SmartyCam HD V 2 / SmartyCam HD GP all have an internal microphone for great racing sound, but it does limit your sound options. This special cable has a 3.5mm mono jack for an external microphone. The input from this jack automatically mixes with the sound from the SmartyCam internal microphone. SmartyCam Microphone Cable Fitment Original SmartyCam (2009-13, with the viewing screen on top) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD "Rev 2" or later (2015+) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD GP "Rev 2.1" or earlier (to 2018) Exp port to AiM dash/logger or SMC Bridge AiM SmartyCam CAN Cable with Microphone Jack, 4M Details: Manufacturer: AiM Manufacturer part number: V02566300 Alternate part number: MC-552 Dash, Solo DL, Solo 2 DL End: 5 Pin Male 712 SmartyCam End: 7 Pin Male 712 Microphone jack: 3.5mm female mono Cable length: 4M (13 feet) Length from 7 pin 712 to "Y" Adapter: 50mm Length from Y adapter to 5 pin 712" 4 Meter Length from Y adapter to microphone 3.5mm female jack: 900mm The 7-pin 712-type connector plugs into the CAN port on the original AiM SmartyCam. A 5-pin connector on the other end connects your SmartyCam to your AiM data logger, SMC Bridge, etc. Measures 4M (13 feet) long. 3.5mm mono microphone jack is attached to the lead. This cable is not compatible with the SmartyCam HD, which has a 5-pin plug.

AiM SmartyCam CAN Cable with In-Line External Microphone, 4M Add An External Microphone to your AiM Solo DL with SmartyCam Orig or SmartyCam HD V.2 with this AiM connection cable. This special CAN cable plugs into the CAN port on the original AiM SmartyCam (2009-2013) and the HD Version 2 to connect to your AiM data logger, SMC Bridge, etc. An external microphone is incorporated into the cable. The input from this microphone automatically mixes with the sound from the SmartyCam internal microphone for enhanced sound. Measures 4M (13 feet) long. This CAN cable has a 7-pin 712 (screw-in) connector on the camera end. It is not compatible with the SmartyCam HD (Orig Version 1), which has a 5-pin plug. SmartyCam Microphone Cable Fitment Fits Solo DL & SmartyCam Orig (Grey Unit) Fits Solo DL & SmartyCam HD Rev.2 (Black Box w/ Red Ring Around Lens) Fits Solo DL & SmartyCam HD Rev.2 Plus (Black Box w/ Black Ring Around Lens) Camera End: 7-Pin 712 Screw-in connector Can End: 5-Pin 712 Screw-in connector AiM SmartyCam CAN Cable with In-Line External Microphone, 4 Meter Details: Manufacturer: AiM Manufacturer part number: V02566240 Length- 4 Meters (13 Feet)

Aim Sports 4-Port Data Hub The acquisition of the essential data you need to evaluate your race car's performance requires the connection of a lot of peripherals to your AiM data-logger. This, in turn, requires a great number of cables. To solve this problem, AiM developed the Data Hub, a CAN connection multiplier that works as an interface between all AiM data-loggers and their various peripherals. Extend the capabilities of your AiM data-logger without occupying any more channels or running more cables to your dash. Each AiM 4-Port CAN Data Hub connects up to four CAN peripherals. You can even stack as many as four AiM Data Hubs, multiplying the number of available connections! Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (thermocouple) Hubs. Any channel can be selected for display on the dash. Includes a 15-inch cable. AiM 4-PORT CAN DATA HUB DETAILS Manufacturer: AiM Sports Manufacturer part no: X08HUB010 Connectors 1-4: Binder 712 5-pin, female (from peripherals) Connector 5: Binder 712 5-pin, male (to dash) Dimensions: 123 x 30 x 23.5mm (4.8 x 1.2 x 0.9 in.) CAN cable length: 40cm (15.75 in.) Weight: 97g (3.4 oz.) Waterproof: IP65 AN EXAMPLE OF A COMPLEX SETUP Let's take a V-8 race car with an AiM MXG 1.3 dash plus the following peripherals: One EGT sensor on every cylinder (8) Two CHT sensors on each cylinder bank (4) One Lambda sensor on each exhaust header (2) One GPS09C module One AiM Memory Key You would need three TC Hubs and two Data Hubs. The EGT and CHT thermocouples would all connect to the three TC Hubs. The TC Hubs and the GPS09C connected to one 4-Port Data Hub. That Data Hub would be connected, the two Lambda controllers, and the Memory Key connect to a second 4-Port Data Hub. And that Data Hub would connect to your AiM MXG 1.3 dash. That's sixteen channels monitored by the MXG 1.3 in addition to the other channels still available. That puts an enormous amount of data  right at your fingertips!

AiM Sports EGT Thermocouple Sensors Add the appropriate AiM Sports Exhaust Gas Temperature sensor to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level! AiM devices can measure exhaust gas temperature using a sensor – thermocouple – placed in the exhaust header pipe. All AiM thermocouples are K-type sensors and fit car, motorcycle, and karting installations. Cable length is 250mm (~10 in.) TEMPERATURE SENSOR TYPES K-type thermocouple, M5 thread (includes weld nut) K-type thermocouple, T12 (CIK-FIA homologated)

AiM MXL 3.5mm Download Cable AiM MXL Download Cable to download your data from your MXL Dash to your laptop. The AiM MXL Download Cable & CD Kit lets you easily transfer your AiM Data to your Laptop. AiM MXL 3.5mm Download Cable Details: Manufacturer: AiM Manufacturer part number: X10MXLPC01 Manufacturer alternate part number: MC-009-MXL End 1: 3.5mm male End 2: USB AiM MXL USB download cable has a male 1/8" (3.5mm) stereo plug to connect to most MXL series dashes (except those made in 2004 and those supplied in Seat Leon Cup or Formula Renault cars). Note that all MXL series dashes can also use the Memory Key Download Tool (Part No. MC-315) rather than a USB cord for easy data transfer. MXL Pista dashes also have the option to plug the MyChron3 Plus Download Cable (Part No. MC-009-Plus) into the sensor harness if the side port is blocked. Each download cable includes access to free Race Studio software download. AiM Race Studio 2 Software lets you analyze the data from your MXL Pista or Pro dash in an organized and highly professional way. Your data can be analyzed in several different styles thanks to graphs, histograms, comparisons between lap data and test data, and time comparison tables. Many calculation features are available like math channels and power and torque calculators. Race Studio 2 software is also required for setting up any MXL dash. Compatible with Windows 10, Vista, 98 SE, 2000, ME, XP, 7, and 8 and functions in several different languages: English, Italian, German, French, Spanish, Dutch, Portugese, Finnish, and Japanese. This is an excellent spares kit item as other racers borrow it and "forget" to return it. Be prepared and get faster.

Harness Adapter for 2004-2007

AiM MyChron 5 Battery Replacement Pack Have a charged extra MyChron 5 battery pack, ready to go. Be ready for anything on the kart track with this rechargeable Lithium battery. You will no longer need to carry with you or worse, locate at your track, your dead MyChron 5 Battery. The MyChron 5 rechargeable battery lasts more than ten hours. Charge it in your shop, trailer, or truck just like a cell phone and use it all day long. MyChron 5 can also be powered by an external 12V power source if you are running external sensors or AiM SmartyCams. AiM MyChron 5 Battery Replacement Pack Details: Manufacturer: AiM Manufacturer part number: 2BT18650TDM Manufacturer alternate part number: AIM-MC-111 Fits MyChron 5 and MyChron 5 2T: Yes Fits MyChron 4: No