Auto Racing Driver Safety Gear at DiscoveryParts – Page 26

Chillout Systems Chillout Pro Sport Socks $69.00

CHILLOUT PRO SPORT FIRE RESISTANT SOCKS The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin termperature by up to eight degrees which will quicken your reflexes and reaction time on the track. The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag. FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: S / M / L Colors: BLACK, WHITE Composition:28% Aramide, 28% Viscose FR, 22% Modacrylic, 18% Cotton, 4% Elastane PERFORMANCE CHILLOUT PRO SPORT SOCKS SIZING AND USAGE CHILLOUT PRO SPORT SOCKS All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles. The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. MAINTENANCE CHILLOUT PRO SPORT SOCKS Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care. Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time. Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. EMBROIDERY/LABELS CHILLOUT PRO SPORT SOCKS Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. CLEANING/MAINTENANCE CHILLOUT PRO SPORT SOCKS The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments. EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT SOCKS Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.

SpeedCom Communications Speedcom Helmet Speaker Kit (3.5mm Mono) $66.00

Helmet Speaker Kit Speedcom SCC-HSK3.5 helmet speaker kit features a 3.5mm mono connector to tie into existing communications systems. The speaker pads feature velcro mounting to easily and surely attach to your helmet's interior. SPEEDCOM Single Ear Headset Details: Manufacturer: Speedcom Manufacturer part number: SCC-HSK3.5 Wiring harness protocol: 3.5mm monaural

Stilo Stilo Pivot Kit ST5 Shield and Peak $65.00

Stilo ST5 Shield and Peak Pivot Kit The Stilo ST5 Shield and Peak Pivot Kit allows a Stilo Peak Visor and Shield to be used together on all ST5 helmets. The visor will have to be able to open and close and the peak visor can be adjusted to the perfect angle to keep the sun out of your eyes. Stilo has a reputation for excellence and the ST5 peak and visor kit will not disappoint. Remember, if you are using a shield in combination with a visor, ( Stilo ST5 Short Sun Visor or other visors of your choice ) it is recommended that you order this kit for the visor and shield to all go on a Stilo helmet. Stilo ST5 Shield and Peak Pivot Kit Manufacturer: Stilo Manufacturer part number: YA0864 Fitment: Stilo ST5 versions

Sparco Sparco RW-7 Nomex Socks $65.00

Sparco RW-7 Nomex Socks The RW-7 line of undergarments are designed to provide both comfort and protection. The RW-7 is made from a unique mixture of very comfortable and soft fibers. The undershirts are made with seamless sides with raglan sleeves to enhance comfort. The RW-7 includes knee-length socks. The RW-7 undershirts and underpants are designed to fit close to the body due to the soft stretchable fabric. If you prefer a loose fit, please choose one size up. RW-7 shirts and underpants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, x-cool treatment has an anti-bacterial effect. SPARCO RW-7 NOMEX SOCK TECHNOLOGY FIA 8856-2018 Approved Seamles, stretchable Nomex in key areas for mobility Designed for comfort while in the driving position Minimal external seams for increased driver comfort

Sabelt Sabelt UI-600 Nomex Socks $65.00

Sabelt UI-600 Nomex Socks FIA 8856-2018 Certified The new UI-600 tech layers from Sabelt offer stretch-fit nearly seamless construction for the ultimate in breathability and comfort while racing. The composition of this new underwear line makes the clothing light, resistant and extremely comfortable. The use of Lenzing FR fiber, which is made of a natural raw material, and keeps the body dry and cool, together with the modacrylic and elasthane, which make the garments totally stretch, make this line the most convenient and the most Innovative across the range. The two way stretch warp knit seamless fabric has a high wear resistance and is very light.

Simpson Hans Device Padding Set - Foam $63.86

Hans Device Padding Set - Foam Hans Replacement Foam Padding Set is a racer's favorite. Make your Hans more comfortable and look new again with Hans Foam Padding. The Hans Device Replacement Padding Set For HANS Devices Includes Two Shoulder Pads. Soft foam may address comfort concerns, especially from those with a ridge where a broken collar bone has healed. Fits medium and large devices only. These are factory installed on all Hans adult devices. Hans Foam Padding Set Details: Manufacturer: Hans Manufacturer part numbers: K9005, K9007, K9024, K9008 Colors: Black, Blue, Red, Yellow Fitment: All Hans devices in Medium & Large Sizes Fits Youth devices: No

sale

00
DAYS 00
HRS 00
MIN 00
SEC

Stilo Stilo Helmet Aero Kits from $60.77 $67.52

Stilo Helmet Aero Kits These aero kits from Stilo provide all the downforce needed for open-cockpit drivers to reduce helmet lift. They are especially popular for IndyCar, Formula Atlantic, and Radical drivers. Choose between rear aero, front IndyCar kit, or both!

-9% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Hans Stilo HANS Post Anchors (SA2015 - SA2020) $60.00 $65.23

Stilo HANS Helmet Post Anchors (for SA2015 and newer) Stilo branded HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2015 or SA2020 helmet. (Those helmets have threaded M6 inserts molded into the helmet.) These post anchors are FIA-approved and screw right into those helmet inserts. Stilo's FIA Approved HANS Posts In Black/Blue/Red Anodized Metal With Laser Engraving Dresses Up Every Stilo build. These are the Stilo FIA Internationally Approved Hans Posts. Includes one pair (does one helmet) Stilo FIA HANS Posts in Red Details: Manufacturer: Stilo Manufacturer part number: AK 1131.12K-Stilo AK113112K-STILO BLACK Manufacturer part number: AK 1131.12B-Stilo AK113112B-STILO BLUE Manufacturer part number: AK 1131.12R-Stilo AK113112R-STILO RED Qty in kit: Two Color: Red Nut washers included: No FIA approved: Yes

-15% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Trac-Com Stilo Helmet Cable To Raceceiver $60.00 $69.95

Stilo Helmet Adapter To Raceceiver Radio Systems Genuine Stilo to Raceceiver helmet adapter cord connects the female communication port on your Stilo helmet to any female Raceceiver-style car harness. Manufacturer: Stilo Manufacturer part number: YB0104

Simpson Shock Doctor Helmet Eject Device from $60.00

Shock Doctor Eject Device The Eject helmet removal system will remove your helmet without risk of secondary injuries. Required by IMSA, SRO, NASCAR and many other series, the Eject helmet kit is simple and functional.Eject Helmet Removal Kit Details: Manufacturer: Eject Manufacturer part number: 2080051 Manufacturer alternate part number: 890-01-30I Choose "self Install" to have a new sealed kit sent to you or "we install" to have us install your new Eject for you. IMSA, SRO, NASCAR legal: Yes Eject® Helmet Removal System will remove your helmet without risk of secondary injuries. So simple and required in all higher levels of racing. Packaged singly to be used as a replacement system or for an Eject user with multiple helmets. Eject® Helmet Removal System is a small air bladder that fits easily into any helmet, without changing its fit or feel. In the event of a crash, First Responders can help reduce the risk of secondary neck or spine injuries by inflating the Eject System which gently lifts the helmet off a rider’s head. The most critical moment after a crash is removing the helmet. The EJECT Helmet Removal System is designed to aid in a safer helmet removal by inflating an airbag within the helmet. Once the airbag is inflated the helmet lifts off without causing further injuries to the driver. Note: As of 13 January 2021, IMSA requires the use of either the Eject Helmet Removal Kit or the Stand 21 Lid Lifter Balaclava (per IMSA rulebook section 21.1.2).

Stilo Stilo ST5 Hydration Kit $60.00

Stilo ST5 Helmet Hydration Kit Hydration bite-valve kit designed specifically for the Stilo GT helmets. STILO HYDRATION KIT INCLUDES (1) Male hydration connector (1) Female hydration connector (1) Hydration tube (1) Bite valve

Hans HANS Post Anchors (SA2015 - SA2020) from $60.00

HANS Helmet Post Anchors HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2015 or SA2020 helmet. (Those helmets have threaded M6 inserts molded into the helmet.) These post anchors are FIA-approved and screw right into those helmet inserts.

sale

00
DAYS 00
HRS 00
MIN 00
SEC

Stilo Stilo ST6 Helmet Aero Kits from $59.95 $67.52

Stilo ST6 Helmet Aero Kits These aero kits from Stilo provide all the downforce needed for open-cockpit drivers to reduce helmet lift. They are especially popular for IndyCar, Formula Atlantic, and Radical drivers. Choose between front and rear aero, or both for the best performance!

Discovery Parts Discovery Parts Evo Racing Helmet Bag $59.95

Discovery Parts Evo Racing Helmet Bag The best protection for your racing helmet at a price that won't break the bank! Introducing the ultimate accessory for racing enthusiasts-the Discovery Parts Evo Racing Helmet Bag! Crafted with precision and tailored to the needs of auto racing, this bag combines style, protection, and functionality. Its rugged, water-resistant exterior and reinforced padding ensure your helmet stays safe from damage and the elements. Inside, a soft compartment cradles your helmet, protecting it from scratches while elastic hold-down straps accommodate any size helmet to prevent movement during transport. The bag's comfortable handle and detachable shoulder strap offer convenient carrying options. Experience the fusion of style, durability, and functionality with the Evo Racing Helmet Bag from Discovery Parts. Designed for discerning auto racers and track-day participants, this bag elevates your racing gear game and keeps your helmet in pristine condition. Make a statement on the track with this exceptional accessory today! FEATURES OF THE DISCOVERY PARTS EVO HELMET BAG The Discovery Parts Evo Racing Helmet Bag is constructed of formed high-density polyethylene, creating a firm, durable barrier to protect your helmet. Thick rubber feet allow the helmet bag to stand bag upright. The comfortable rubberized non-slip carrying handle makes it easy to carry even with gloves on, and the convenient super-wide clam shell opening makes the Discovery Parts Professional bag a breeze to use. DISCOVERY PARTS EVO HELMET BAG DETAILS Manufacturer: Discovery Parts Manufacturer part number: DP-6501 Color: Black with Discovery Parts logo Heavy-duty zipper pulls: 1 Shoulder strap: Yes Note: Helmets pictured are for illustrative purposes only and are not included with the Discovery Parts Evo Racing Helmet Bag.

FluidLogic MagLock Air Helmet Side Only Kit $59.95

Maglock Helmet Side Air Kit Maglock Air hose NOT included Maglock Air - Helmet Side Only Kit What's included with the helmet side air kit: Maglock® Air Helmet side Maglock® Air Dust Cap Maglock® Visor Sticker Tool Kit

Hans HANS Pro Ultra / Ultralite Quick Click Tether Kits $59.95

HANS Tether for Sport I, Adjustable, Pro Ultra, & Pro For Quick Click Anchors Hans Device Replacement Tether For your Hans Adjustable, Pro Ultra, Sport I, and Hans Professional with Quick Click anchors. This Hans replacement tether and slider kit comes in the standard 16.5" length and others for special applications. HANS Tether for Sport I, Adjustable, Pro Ultra, & Pro For Quick Click Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1241.4 Length: Standard 16.5" / 420cm length works in most applications and is the one that comes standard with every adult device. Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether from inside of both loops: 14.5" / 370cm TK12414XS Length of Short tether from inside of both loops: 15.5" / 395cm TK12414S Length of Standard tether from inside of both loops: 16.5" / 420cm TK12414 Length of Long tether from inside of both loops: 17.5" / 445cm TK12414L If you have a medium or large device, please stay with the standard 16.5" length Your device is safest with the factory installed and tested 16.5" length. If you feel you need a special length, please call us at 706-344-1235 so we can make sure you have the safest set-up.

Find anything you need

Driver Gear