Auto Racing Driver Safety Gear at DiscoveryParts – Page 27

Hans HANS Sport 3 Quick Click Tether Kits $59.95

HANS Tether for Hans III For Quick Click Anchors Hans Device Replacement Tether For your Hans III with Quick Click anchors. This Hans replacement tether and slider kit fits the Hans III (also nicknamed the Hans Sport 3) device and comes in the standard 16.5" length and others for special applications. HANS Tether for Hans III For Quick Click Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1441.7Length: Standard 16.5" / 420cm length works in most applications and is the one that comes standard with every adult device. Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether from inside of both loops: 14.5" / 370cm TK14417XS Length of Short tether from inside of both loops: 15.5" / 395cm TK14417S Length of Standard tether from inside of both loops: 16.5" / 420cm TK14417 Length of Long tether from inside of both loops: 17.5" / 445cm TK14417L If you have a medium or large device, please stay with the standard 16.5" length Your device is safest with the factory installed and tested 16.5" length. If you feel you need a special length, please call us at 888.748.7223 so we can make sure you have the safest set-up.

Hans HANS Pro Ultra / Ultralite Tether Kits $59.95

HANS Pro Ultra / Ultralite / Sport 1 Tether Kits Replace the tether kit on your HANS Pro Ultra / Ultralite / Sport 1 if you're involved in an incident, or swap out your existing tether for a longer or shorter one. For use with Sliding tethers and post anchors only.

Bell Bell Victory R1 Helmet Bag $59.95

Bell Victory R1 Helmet Bag Bell high-end Victory R1 helmet bag protects your investment while incorporating updated styling elements based on Bell original all leather helmet bag. The bag features and external pocket for storage of helmet accessory kits. BELL VICTORY R1 HELMET BAG SPECS: Length: 15 in. Width: 13.5 in. Height: 13 in.

Hans HANS Sport 3 Tether Kits $59.95

HANS Sport III Tether For Post Anchors Hans Device Replacement Tether For your Hans Sport III device with Post anchors. This Hans replacement tether and slider kit fits the Hans Sport III device and comes in the standard 18" length and others for special applications. HANS Sport III Tether For Post Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1441.3 Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether: 16" / 406cm TK14317XS Length of Short tether: 17" / 431cm TK14317S Length of Standard tether: 18" / 457cm TK14317 Length of Long tether: 19" / 482cm TK14317L If you have a medium or large device, please stay with the standard 18" length

-22% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpinestars Alpinestars Race v3 Nomex Balaclava (Discontinued Colors) $59.00 $74.95

Alpinestars Race v3 Nomex Balaclava This Formula 1 specification balaclava is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a driving suit. ALPINESTARS RACE V3 BOMEX BALACLAVA KEY FEATURES Flat seams construction to reduce pressure points and improve strength. Mouth opening for hydration tube access. ALPINESTARS RACE V3 BOMEX BALACLAVA CONSTRUCTION Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements. Soft-touch textile for feel and enhanced comfort. ALPINESTARS RACE V3 BOMEX BALACLAVA PROTECTION Certified to the new FIA 8856-2018 homologation standard. Lenzing FR¬ material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.

Sparco Sparco RW-4 Nomex Socks $55.00

Sparco RW-4 Nomex Socks The RW-4 line of undergarments are designed to provide both comfort and protection. The RW-4 features a mid-calf soft-touch interlock fabric. SPARCO RW-4 NOMEX SOCK TECHNOLOGY Soft and comfortable Regular Fit FIA 8856-2018 Approved

Paragon Paragon 1.5" Air Hose (10ft) $54.99

Paragon 1.5" Air Supply Hose (10 Feet) Paragon’s 1.5” diameter x 10’ length Air Hose is designed to work with Paragon Viking Pro coolers, Viking Pro Bundles, and Air Blower Bundles. At 1.5” diameter, the Paragon Air Hose is small and flexible enough to route to your helmet without any necessary weight, giving you great head cooling while aiding in keeping fog off your visor. Paragon 1.5" Air Supply Hose Details Manufacturer: Paragon Manufacturer part no.: 02-45000 Hose OD: 1.5" Hose length: 10 feet Weight: 2 lbs.

Stilo Stilo ST5 Top Ram Air Vent Kit $53.00

Stilo ST5 Top Ram Air Vent Kit Force cool air into your helmet with The Stilo ST5 Top Ram Air Vent Kit . Every formula car, open wheel and kart racer puts this hi-impact ABS clear ram air vent on. Does it work? Just jump out of the draft and feel the rush of cool air as you make that offline last corner pass. Stilo ST5 Top Ram Air Vent Kit Details: Manufacturer: Stilo Manufacturer part number: YA0822 Qty in kit: two (sold as a pair) Material: Impact Plastic Attaches how: 3M VHB 2 Sided Tape Fits all Stilo ST5 Helmets: Yes Fits Stilo ST4 Helmets: No, Use Stilo YA0620 ST4 Ram Air Intake Kit For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a Top air vent to help move the cool air into the helmet, a rear spoiler for stability and slight downforce, as well as a vent blockoff kit to allow for more control of the airflow inside the helmet. All pieces are made of clear plastic, and easily adhere with double-sided adhesive tape (pre-installed).

Stilo Stilo ST5 Front Spoiler Kit $53.00

Stilo ST5 Front Spoiler Kit For Open Cockpit Racers, The Stilo ST5 Front Spoiler stabilizes your helmet and stops buffeting and lifting at high speeds. Used in WKA kart racing to compensate for the extreme upright seats some kart racers have. For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a front spoiler to help split air around the helmet. No more helmet lifting and instability under the highest speeds in a car with questionable driver aero. All pieces are made of clear plastic, and adhere with double-sided adhesive tape. Stilo ST5 Front Spoiler Kit Details: Manufacturer: Stilo Manufacturer part number: YA0823 Reduce Helmet Buffeting Removable Fits All Stilo ST5 Models Can be painted

Alpinestars Alpinestars Race v4 Nomex Socks $52.95

Alpinestars Race v4 Nomex Socks Alpinestars Race v4 Socks are lightweight, durable and ergonomically designed to meet the demands of the world top drivers. Certified to FIA homologation standards, these socks offer excellent protection from heat transfer and flat seams for long-lasting comfort. ALPINESTARS RACE V4 NOMEX SOCK PROTECTION Certified to the new FIA 8856-2018 homologation standard.

Roux Helmets Roux Peak Visor White Fits Roux R-1 Helmets $50.00

Roux Peak Visor White Fits Roux R-1 Helmets Analogous to the brim of a hat, peak visors are designed to keep the sun out of your eyes. Roux peak visors will fit your your Roux R-1 Helmet perfectly. Roux Peak Visor White, Fits Roux R-1 Helmets Details: Manufacturer: Roux Manufacturer part number: RXHS05-15G00 Color: Gloss White Roux hardware kit ROU-RXHS07-15D is required to install this peak visor

Roux Helmets Roux Peak Visor Silver Fits Roux R-1 Helmets $50.00

Roux Peak Visor Silver Fits Roux R-1 Helmets Analogous to the brim of a hat, peak visors are designed to keep the sun out of your eyes. Roux peak visors will fit your your Roux R-1 Helmet perfectly. Roux Peak Visor Silver, Fits Roux R-1 Helmets Details: Manufacturer: Roux Manufacturer part number: RXHS05-15444 Color: Silver Roux hardware kit ROU-RXHS07-15D is required to install this peak visor [img-6519-left-large_default]

Rental Daily Rental of HANS Device at AMP from $50.00

Rent An Up-To-Date HANS Device Right At AMP! Discovery Parts store in the AMP paddock carries a full complement of HANS devices to make sure every driver is safe out on the race track. You can rent a HANS device for up to four days. Your rental is due back to Discovery Parts by 5pm on the final day of your rental.

Rental Daily Rental of One Piece Race Suit at AMP from $50.00

No Fire Suit? No Problem, We'll Rent You One! Rent a one-piece, multi-layer SFI rated fire suit at the Discovery Parts store right in the Atlanta Motorsports Park paddock. Clean, comfortable, and professionally-maintained, our rental suits will keep you safe while you're out on the AMP race track.

Stilo Stilo ST5 Side Air Kit $50.00

Stilo ST5 Side Air Kit Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This side air kit allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. MUST BE USED IN CONJUCTION WITH SIDE AIR ADAPTER HOSE YA0639.

Bell BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet $49.95

BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE (Clear)1 Pcs COVER PLATE2 Sets* SEAL KIT *Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.

Find anything you need

Driver Gear